Setting time delay
3 With the DELAY TIMER (STARTTIJDKEUZE) button, you can delay the start of a programme by between 30 minutes (30' and a maximum of
23 hours (23h).
1.Select the programme
2.Press the DELAY TIMER (STARTTIJDKEUZE) button as many times as nec- essary until the required start delay appears on the multi display, e.g. 12h if the programme is to be started in 12 hours. The DELAY TIMER (STARTTIJDKEUZE) display is illuminated.
3 If 23h is displayed and you press the button again, the time delay will be cancelled. The display will show 0' and then the duration of the se- lected programme.
3.To activate the delay timer, press the START/PAUSE (START/PAUZE) but-
ton. The amount of time remaining until the programme is set to start is continuously displayed (e.g. 12h, 11h, 10h, … 30' etc).
3 Until the start of the programme the drum is moved at longish intervals to loosen the laundry.
Starting the programme
Press the START/PAUSE (START/PAUZE) button. The programme is start- ed.
The programme progress display and the display showing the level of dryness show drying progress.
Changing programme
To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF (UIT) and then reset the programme.
3 The programme can no longer be changed directly once the programme has started. If nevertheless there is an attempt to change the pro- gramme on the programme knob, the programme progress display and the maintenance indicators flash. If an option button (excluding the SIGNAL (ZOEMER) button) is pressed, Err appears in the multidisplay. The drying programme is not however affected by this (laundry protec- tion).
15