6.To clean the filter mat:
Remove filter mat from filter hous- ing. To do this, press the pressure points on the sides and pull the fil- ter mat and frame up and out of the housing.
7. Take the filter mat out of the frame and wash it by hand or use a vacu- um cleaner, when it is has dried out. Fluff, which has become stuck in the filter mat and has not been removed by washing, does not af- fect the function.
8.Insert the filter mat in the frame
and then insert with the frame into the filter housing.
1 Important: The filter mat must en- gage tightly with the frame. Check that the mat is sitting snuggly in the frame, especially after inserting it into the filter housing.
9. As necessary, approx. once every 6 months, remove the fluff from the heat exchanger using the sponge supplied. When doing this, please use rubber gloves.
Tip: The fluff can be removed more easily if it is first dampened e. g. with a laundry dampener.
10.
and filter mat in the base of the appliance.
Note: If the filter mat and frame are not inserted in the filter housing, the filter housing cannot be pushed into the base of the appliance.
11.Close door in plinth.
3 The indicator CLEAN BASE FILTER (REINIG SOKKELFILTER) only goes out when the programme knob has been positioned to OFF (UIT).
21