Removing transport safety equipment
1 Caution! Before first starting up, all parts of the transport safety equipment must be removed.
1. Open loading door
2. Pull off adhesive strips from inside machine on top of drum.
3.Remove foil hose and polystyrene
padding from the machine.
1 If the appliance was not transport- ed in an upright position, leave it to stand for 12 hours before con- necting it to the electricity supply and using it for the first time, so that the oil can flow back to the compressor. Otherwise the com- pressor could be damaged.
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken from the type plate. The type plate is fitted near the loading aperture (see “Machine description” section).
Important:
The plug must be accessible after the appliance has been installed.
29