14Daily use
Starting the programme
Press the START PAUSE button. Led above stops flashing, becomes steady. The programme is star- ted. Display shows elapsing cycle time or delay time if activated.
Changing programme
To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF and then reset the programme.
The programme can no longer be changed directly once the programme has started. If nevertheless there is an attempt to change the programme on the programme knob, the programme progress display and the maintenance indicators flash. If an option button (excluding the BUZZER button) is pressed, Err appears in the multidisplay. The drying pro- gramme is not however affected by this (laundry protection).
Putting in extra items or taking items out before end of programme
1. Open loading door.
WARNING!
Laundry and drum can become hot. Risk of burns!
2.Load or remove laundry items.
3.Close loading securely. Lock must audibly lock.
4.Press the START PAUSE button to continue the drying cycle.
Drying cycle complete / removing laundry
Once the drying cycle is complete, display shows a blinking "0". If the BUZZER button has been pressed, an acoustic signal sounds intermittently for about one minute.
The drying cycles are automatically followed by an
1.Open door.
2.Before removing the laundry, remove fluff from the
3.Remove laundry.
4.Turn the programme selector to OFF.
After each drying cycle: