AEG 56740 user manual Electrical connection, Or by the earth symbol Or coloured green Yellow

Page 25

Installation 25

3. Remove foil hose and polystyrene pad- ding from the machine.

Electrical connection

Details on mains voltage, type of current and the fuses required should be taken from the rating plate. The rating plate is fitted near the loading aperture (see “Product description” chapter).

Connect the machine to an earthed socket, in accordance with current wiring regulations.

WARNING!

The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions.

Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the

fuse in the plug supplied, a 13 amp ASTA approved BS 1363/A fuse must be used.

The wires in the mains lead are coloured in ac-

 

4

cordance with the following code:

 

 

 

1

Blue - Neutral

 

 

 

2

cord clamp

 

 

 

3

Brown - Live

 

 

 

4

Green and Yellow - Earth

 

 

The wire coloured green and yellow must be con-

 

 

nected to the terminal marked with the letter «E»

 

3

or by the earth symbol

or coloured green and

 

 

 

yellow.

 

1

 

The wire coloured blue must be connected to the

2

 

terminal «N» or coloured black.

 

 

The wire coloured brown must be connected to

 

 

the terminal marked «L» or coloured red.

 

 

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

WARNING!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

WARNING!

The power supply cable must be accessible after installing the machine.

Image 25
Contents Condenser Dryer LavathermContents General safety Important safety informationImportant safety information Use InstallationOnly dryers equipped with internal drum light Child safetyProduct description Product descriptionBefore first use Control panelSorting and preparing laundry Control panelPreparing laundry Sorting and preparing laundryDry at normal tem Perature Drying in the tumble Dryer not possibleProgramme overview Not ironed Programme overviewAfter drying Daily use Switching machine on / switching light onOpening loading door / loading laundry Selecting the programmeBuzzer function Long ANTI-CREASE functionTime function Child Lock function Delay Start functionSelect the programme and additional functions if necessary Changing programme Starting the programmeDrying cycle complete / removing laundry Page Cleaning fluff filter Care and cleaningCare and cleaning Clean the entire filter area Cleaning the door sealEmptying the condensate tank Door seal with a damp cloth Cleaning heat exchangerClean operating screen and housing Cleaning the drumDo not use abrasives or steel wool to clean the drum What to do if Troubleshooting by yourselfWhat to do if Changing the bulb for interior lighting Machine settings Machine settingsTechnical data Technical dataConsumption values Hints for test institutesRemoving transport safety packaging InstallationAppliance positioning Wire coloured blue must be connected to Or by the earth symbol Or coloured green YellowElectrical connection Intermediate installation kit for stacked washer and dryer Special accessoriesInstallation kit for external condensate drain EnvironmentEnvironmental tips Packaging materialEnvironment Residual dampness0870 5 929 GB IE Guarantee/Customer ServiceElectrolux European GuaranteeAEG-Electrolux Zanussi-Electrolux261 AlbaniaBelgique/België/Belgien 363 04Paço de Arcos PortugalMägenwil 136905410-00-29022008