AEG 56740 user manual Machine settings

22 Machine settings

Machine settings

Setting			Implementation
BUZZER permanent off	1.	Turn the programme selector to any programme.
	2.	Press simultaneously the DELICATE and LONG ANTI-
		CREASE buttons and hold down for approx. 5 sec-
		onds.
	3.	The buzzer is by default always off. You can use BUZ-
		ZER button to activate or deactivate sound but ma-
		chine does not memorize your selection.
Water hardness	1.	Turn the programme selector to any programme.
Water contains, a variable quantity of	2.	Press simultaneously the DELICATE and TIME buttons
		and hold down for approx. 5 seconds. The current
limestone and mineral salts of which
		setting is on the display:
quantities vary according to geograph-
		–	low conductivity <300 micro S/cm
ical locations thus varying its conduc-
		–	medium conductivity 300-600 micro S/
tivity values.
		cm
Relevant variations of the conductivity
		–	high conductivity >600 micro S/cm
of the water compared to those prefixed
by the factory could slightly influence	3.	Press the START PAUSE button sequentially until you
the residual humidity of the laundry at	4.	set desired level.
the end of the cycle. Your dryer allows		To memorize setting press simultaneously the DELI-
		CATE and TIME buttons or turn knob to OFF position
you to regulate the sensitivity of the
drying sensor based on conductivity
values of the water.
Emptying water tank - warning mes-	1. Turn the programme selector to any programme.
sage permanent off	2.	Press simultaneously the LONG ANTI-CREASE and
When using an external drain for the		TIME buttons and hold down for approx. 5 seconds.
		The current setting is on the display:
condensed water.
		–	- led warning is permanently off
		–	- led warning is activated
	By default the warning led is activated and is lighting
	always at the end of the drying cycle or during the cycle
	if the water container is full.