20What to do if ...
What to do if ...
Troubleshooting by yourself
If, during operation, the error code E... plus number or letter) appears on the LCD: Switch the machine off and on again. Reset programme. Press the START PAUSE button If the error is still displayed, please inform your local Service Force Centre and quote the error code.
Problem | Possible cause | Remedy | |
| Mains plug is not plugged in or | Plug in at mains socket. Check | |
| fuse in fuse box (domestic in- | ||
| fuse is not working correctly. | stallation). | |
Dryer does not work. |
| ||
Loading door is open. | Close loading door. | ||
| |||
|
|
| |
| Have you pressed the START | Press the START PAUSE button | |
| PAUSE button? | again. | |
|
| Select a different programme | |
| Wrong programme selected. | the next time you dry (see “Pro- | |
|
| gramme chart” chapter). | |
| Lint filters clogged. | Clean lint filters. | |
| Fluff filter clogged. | Clean fluff filter. | |
| Heat exchanger clogged with | Clean heat exchanger. | |
| lint. | ||
|
| ||
Drying results unsatisfactory. | Overloading of laundry. | Observe recommended loading | |
volumes. | |||
|
|
| |
| Ventilation slots in base area | Uncover ventilation slots in | |
| covered up. | base area. | |
| Residue on inside surface of | Clean inside surface of drum | |
| drum or drum ribs. | and drum ribs. | |
| Conductance of water at in- | ||
| ting for degree of drying (see | ||
| stallation site differs from | ||
| ‘Programming options’ chap- | ||
| standard setting of machine. | ||
| ter). | ||
|
| ||
|
|
| |
| Fine strainer not in place and/ | Install fine strainer and/or snap | |
Loading door does not close. | or mesh filter not locked in | ||
large mesh filter into place. | |||
| place. | ||
|
| ||
When a button is pressed, Err | Washing protection. After the | Turn the programme knob to | |
start of the programme, the | |||
appears on the LCD. | OFF. Set the programme again. | ||
option can no longer be set. | |||
|
| ||
| Programme selector in OFF po- | Turn programme selector to | |
| DRUM LIGHT or to any pro- | ||
Drum light does not work. | sition. | gramme. | |
| |||
| Defective light bulb. | Replace light bulb (see next | |
| section). | ||
|
| ||
|
|
|