Troubleshooting
Troubleshooting
In the event of a malfunction try to solve the problem yourself using the information below. If you call out the customer service to solve one of the problems listed here or due to incorrect operation, a charge will be made for the visit of the service engineer even during the warranty period.
Problem | Possible cause | Remedy | |
| Electric mains plug not | Connect the mains plug | |
| connected | ||
|
| ||
|
|
| |
| X STARTbutton not | Press the X START | |
| pressed | button | |
| No program set | Set a program | |
The dryer is not working | Close the | ||
| |||
| Fuse blown or automatic | Check the fuse or | |
| automatic circuit breaker. | ||
| circuit breaker in the | ||
| Get an electrician to repair | ||
| fusebox (house electrical | ||
| any faults in the house | ||
| installation) defective | ||
| electrical installation. | ||
|
| ||
|
| Set a different (time) | |
| Wrong program selected | program for the next | |
|
| drying process | |
|
|
| |
| Fluff filter clogged | Clean the fluff filter | |
| Heat exchanger covered | Cleaning the heat | |
| with fluff | exchanger | |
| Incorrect amount of | Keep to the | |
The drying result is | recommended amount of | ||
laundry | |||
unsatisfactory | laundry to be | ||
| |||
|
|
| |
| Laundry drained insuffi- | Drain the laundry | |
| ciently before drying | adequately | |
| Ventilation slits in the | Clear the ventilation slits | |
| base region | in the base region | |
|
|
| |
| Deposit on the inside | Clean the inside surface | |
| surface of the drum or on | of the drum and the | |
| the drum ribs | drum ribs | |
|
|
|
26