AEG 56609 operating instructions Installation and connection

Page 7

Safety instructions

Installation and connection

First take-off the base shroud before carrying the dryer!

Check the dryer for Transportation damage. Never connect-up a damaged appliance! Contact your supplier if the appliance is damaged.

Do not set-up the dryer in frost-endangered rooms!

Set-up the dryer horizontal!

Do not place the dryer on high-pile carpet floors!

This would hinder air circulation at the ventilation slots!

If the dryer is placed adjacent to a gas, coal or electric cooking stove, interpose a thermally insulating non-combustible plate between the dryer and the stove (dimensions: 85x57,5cm).

The electric power plug connector of the appliance must remain accessible even after erection.

The technical conditions of the electric power supply company for making fixed connections of electrical appliances to the mains require that such connections may only be made by an authorised electrician.

7

Image 7
Contents Lavatherm 56609 Exclusiv Please read these operating instructions through carefully Dear customerContent Content General safety 1Safety instructionsUtilisation in accordance with the intended purpose Safety of childrenInstallation and connection General information Dispose of the packaging material DisposalPre-drying Drying process Environmental protection tipsFill weight Duration Power Drying program Front view Construction of the applianceOperator control mask Program selector Before the first drying processBrief operating instructions Fill-in the laundry DryingPreparing the laundry Open the fill-in doorStart the drying program Take out the laundry Take-out laundry or put-in laundry when necessarySwitch-off the dryer End of the drying processEmpty the condensate container Clean the condenser Clean the fluff filterProgram tables Care symbols R, Q fill-in quantity up to 5kgCool AIR Program Small glossary of textile information Care symbolsCleaning the condenser Cleaning and maintenanceClean the drum Cleaning the filter areaCleaning the panel and operating parts Problem Possible cause Remedy TroubleshootingOFF Replace the filament bulb Changing-over the door stop Changing-over the door stop Power supply Technical dataInformation for the electrician Kit for external condensate drain-off Special accessoriesKits Washing/drying column Use condensate Viscose Page When do you incur costs even during the warranty period? Service