AEG 56609 operating instructions Cleaning and maintenance, Cleaning the condenser

Page 24

Cleaning and maintenance

Cleaning and maintenance

Cleaning the condenser

1 Important! It is essential to clean the condenser after every thirty

drying processes. Otherwise your dryer might suffer damage. Furthermore, energy consumption is greater when the condenser is covered with fluff.

0Open the fill-in door.

0Press on the two tabs to unlatch and

take off the base mask.

0Turn the two securing disks through a quarter turn each outwards.

0Pull the condenser out of the base by the

handle.

0Clean the condenser, best with a hand- held brush or by rinsing-through

strongly with a hand-held shower head. The water removal slits on the rear of the condenser must be free too.

1 Important! Do not use any sharply pointed objects to clean the condenser. They could make it leak.

0Reinsert and latch the condenser again (turn each one of the two securing disks through a quarter turn inwards). The legend "top – oben – en haut" must be at the top.

0Re-mount the base mask.

1 Important! The dryer must not be operated without condenser.

24

Image 24

Contents Lavatherm 56609 Exclusiv Dear customer Please read these operating instructions through carefullyContent Content 1Safety instructions General safetySafety of children Utilisation in accordance with the intended purposeInstallation and connection General information Disposal Dispose of the packaging materialEnvironmental protection tips Pre-drying Drying processFill weight Duration Power Drying program Construction of the appliance Front viewOperator control mask Before the first drying process Program selectorBrief operating instructions Drying Preparing the laundryOpen the fill-in door Fill-in the laundryStart the drying program Take-out laundry or put-in laundry when necessary Switch-off the dryerEnd of the drying process Take out the laundryEmpty the condensate container Clean the fluff filter Clean the condenserCare symbols R, Q fill-in quantity up to 5kg Program tablesCool AIR Program Care symbols Small glossary of textile informationCleaning and maintenance Cleaning the condenserCleaning the filter area Clean the drumCleaning the panel and operating parts Troubleshooting Problem Possible cause RemedyOFF Replace the filament bulb Changing-over the door stop Changing-over the door stop Technical data Power supplyInformation for the electrician Special accessories Kit for external condensate drain-offKits Washing/drying column Use condensate Viscose Page Service When do you incur costs even during the warranty period?