DRYING RACK (SELECT MODELS)
USING THE DRYING RACK
The drying rack allows you to dry items that you don’t want to tumble dry; for example, sneakers, washable sweaters, stuffed toys, pillows, etc.
The rack remains stationary, but the drum rotates.
(Make sure nothing hangs over the edges of the rack.)
To Use Rack:
1) Open dryer door.
2) Position drying rack in tumbler with the two extension wires toward you.These wires will brace the rack against the front surface of the tumbler. Legs will rest on front ledge and at back of drum.
3) Place wet items on the rack, leaving space between them so air can reach all surfaces.
4) Close dryer door.
5) Use the TIME DRY cycle or use SENSOR DRY LEVEL NORMAL setting. Select time according to moisture and weight of item. Push the START/PAUSE button. It may be necessary to reset the controls if a longer drying time is needed.
To Remove Rack:
1) Open dryer door.
2) Lift rack straight up and out.
Note: If not included with your dryer, contact your Amana dealer for the accessory kit MAL1000AXX or call
SUGGESTED ITEMS | SUGGESTED |
TEMPERATURE SETTINGS | |
|
|
Washable sweaters (block to | Heat |
shape and lay flat on rack) | |
Stuffed toys or pillows | Heat |
(cotton or polyester fiber filled) | |
Stuffed toys* | AIR FLUFF |
(foam or rubber filled) | |
Foam rubber pillows* | AIR FLUFF |
Sneakers | AIR FLUFF or Heat |
WARNING | |
*WARNING – When drying foam rubber, plastic or rubber | |
with heat, it is possible they will suffer damage and could lead | |
to a fire hazard. |
|
10