Amana ND-68 Select Cycle Options, Start the Dryer, Estimated Time Display, Indicator Lights

USING THE CONTROLS

Step 4 Select Cycle Options

PREVENT WRINKLES – Provides approximately 95 minutes of intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling.

SIGNAL – The end of cycle signal is adjustable. Press the “+” or “–” signal pad to increase or decrease the volume of the signal.

Step 5 Start the Dryer

START/PAUSE – Close the door and press the START/PAUSE pad to start the dryer. Pressing OFF cancels the cycle and stops the dryer.

To interrupt a running cycle, press the START/PAUSE pad again.

NOTE: If the dryer has not reached the cool down portion of the cycle, pressing START/PAUSE will pause the cycle indefinitely. If the dryer has moved to cool down, the time will continue to count down to zero.

ESTIMATED TIME DISPLAY

•After pressing START/PAUSE, the display will show the estimated time remaining in the cycle.

INDICATOR LIGHTS

•The indicator lights beside the settings will light when the selection is made.

•The COOL DOWN indicator light will illuminate when the dryer moves into the cool-down portion of the cycle.

•If the PREVENT WRINKLES option has been selected, the PREVENT WRINKLES light will illuminate to indicate that the load is dry and the dryer has moved into the PREVENT WRINKLES portion of the cycle (see Step 4).

6