American Dryer Corp ADG-530D II, WDA-530D II installation manual

Page 19

a.Connecting Both Top Baskets (Tumblers) and Bottom Baskets (Tumblers) Together

Both the top basket (tumbler) and the bottom basket (tumbler) can “Y” together to form one (1) connection point. The bottom basket (tumbler) already includes a 6-inch (15.24 cm) diameter ducting extending to the lower back guard area. The minimum connection at this point is 8-inches (20.32 cm). The upper basket (tumbler) includes no internal ductwork (not provided by ADC, must be purchased elsewhere, must be a minimum of 6-inches [15.24 cm], and only to the top of the dryer). At this point, (where the internal ducting ends at top of the dryer), the diameter must be increased to meet the application as described further in this manual.

IMPORTANT: When connecting ductwork to the top basket (tumbler) exhaust duct, be sure that when screws are used they DO NOT restrict the operation (both opening and closing) of the damper.

IMPORTANT: ALL ductwork joints must be taped to prevent moisture and lint from escaping into the dryer and/or building.

NOTE: Common (“Y”) exhaust connections of the top basket (tumbler) and bottom basket (tumbler) should be installed in such a manner that the back guards/panels can be removed easily for servicing.

IMPORTANT: Exhaust back pressure measured by a manometer at each basket (tumbler) exhaust duct area must be no less than 0 and must not exceed 0.3 inches (0.74 mb) of water column (W.C.) when both baskets (tumblers) are operating.

15

Page 18 Page 20
Image 19
Page 18 Page 20
Contents ADG-530D II/WDA-530D Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Section Procedure for Functional Check of Replacement Receiving and Handling Important InformationWhat to do if YOU Smell GAS Safety PrecautionsPage Specifications SpecificationsSpecifications UNPACKING/SETTING UP Installation ProceduresLocation Requirements Fresh AIR Supply Requirements Dryer Enclosure RequirementsPage General Exhaust Ductwork Information Exhaust RequirementsPage Page Page Page Page Page Page Page Page Page Important Venting Reminders Electrical Requirements Electrical InformationADG-530D Gas GAS Information Type of GAS Page Page Preoperational Tests Preparation for OperationPage Basket Tumbler Coating Starting the Dryer Operating InstructionsPage Shutdown Instructions Service SERVICE/PARTS InformationParts Returning Warranty Parts Warranty InformationReturning Warranty Cards WarrantyPage Cleaning Routine MaintenanceMonths AdjustmentsLubrication Sectionviii TroubleshootingFailed motor contactor/relay Microprocessor controller computer L.E.D. display reads dSFL Failed keyboard touch pad label assembly If dryer is equipped with optional battery backup Dryer operates, but is taking too long to dry Condensation on main door glass Data Label Datalabel LOCATION/INFORMATIONSerial Number Procedure for Functional Check Replacement Components

WDA-530D II, ADG-530D II specifications

American Dryer Corp (ADC) has long been a leader in the manufacturing of high-performance commercial laundry equipment. Among its noteworthy offerings are the ADG-530D II and WDA-530D II models, both of which stand out for their advanced technologies, user-friendly features, and robust construction. These models are designed to meet the needs of laundromats, hotels, and other commercial laundry facilities, providing reliability and efficiency.

The ADG-530D II is a dual-pocket dryer that combines efficiency with superior drying performance. One of its main features is its powerful and energy-efficient heating system, which utilizes advanced airflow technology to reduce drying times while minimizing energy consumption. This model is equipped with a state-of-the-art microprocessor control system that allows for precise temperature and time settings, enhancing flexibility for various fabric types. Additionally, the ADG-530D II includes a large capacity that can accommodate various load sizes, making it an ideal choice for heavy daily usage.

On the other hand, the WDA-530D II model serves a slightly different purpose with a focus on wet cleaning. This innovative machine offers exceptional water extraction capabilities, ensuring that fabrics retain as little moisture as possible, which also contributes to quicker drying times. The WDA-530D II utilizes advanced technology to balance water levels and optimize washing cycles, thereby extending the life of the fabrics and improving overall cleanliness. Its easy-to-use interface simplifies operation, making it suitable for staff with varying levels of experience.

Both models incorporate durable construction materials designed to withstand heavy use in busy environments. Their design prioritizes ease of maintenance, featuring removable lint screens and efficient drainage systems that streamline cleaning and upkeep. User safety is also a priority, with built-in safety features to prevent overheating and ensure reliable operation.

In summary, the ADG-530D II and WDA-530D II by American Dryer Corp represent a blend of cutting-edge technology, user-friendly features, and robust design. Whether for drying or wet cleaning, these machines are engineered to enhance productivity in commercial laundry operations while delivering exceptional performance. Their commitment to energy efficiency and fabric care makes them an excellent investment for any laundry facility looking to enhance their operational efficiency and service quality.
Top Page Image Contents