American Dryer Corp MLG32PD3 installation manual Operating Instructions, Starting the Dryer

Page 29

SECTION IV

OPERATING INSTRUCTIONS

A. STARTING THE DRYER

The dryer is available for use when the appropriate side of the microprocessor display reads “0 minutes” and the amount needed to start the dryer (i.e., “25”). Once the load has been put into the dryer and the main door is closed, start the dryer as follows:

1.Insert the proper number of coins into the coin acceptor. Once the correct “Amount To Start” has been inserted, the display will read “SELECT CYCLE.”

2.Determine fabric setting (selection).

Once the fabric temperature setting (selection) has been determined, start the dryer by pressing the fabric setting key.

3.The dryer will now start, and the display will read the setting and the time vended.

4.The cycle time will count down until the drying and cooling cycles are completed.

5.Upon completion of the drying cycle and cooling cycle, the dryer will shutoff. a. Notes

1)The dryer basket (tumbler) can be stopped at any time by opening the main door. To restart dryer, shut the main door and press desired setting.

NOTE: When a cycle is interrupted by opening the main door, cycle time will continue to count downward, regardless if the door is open or closed.

2) Selection (setting) changes can be made at any time during the drying cycle.

25

Image 29
Contents MLG32PD3 Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Section Procedure for Functional Check Important Information SectionWhat to do if YOU Smell GAS Safety PrecautionsPage Specifications GAS Location of the Dryer Installation ProceduresUNPACKING/SETTING UP Page Fresh AIR Supply Dryer Enclosure RequirementsPage Exhaust Requirements 882099 Page 882099 Electrical Requirements Electrical InformationBlack White Green Electric Service Specifications PER Tumbler GAS Information 23,940 kcal/hr Page Preoperational Tests Preparation for OperationInches Water Column 26.1 mb Basket Coating Shut Down InstructionsStarting the Dryer Operating InstructionsParts SERVICE/PARTS InformationService Warranty Warranty InformationReturning Warranty Cards Cleaning Routine MaintenanceVoid the Warranty Lubrication AdjustmentsData Label Location Dryer Data Label InformationData Label Serial Number Procedure for Functional Check Replacement Components Part No 1- 11/03/00-50