American Dryer Corp MLG32PD3 installation manual For Your Safety

Page 3

IMPORTANT

YOU MUST DISCONNECT and LOCKOUT THE ELECTRIC SUPPLY and THE GAS SUPPLYBEFOREANYCOVERSorGUARDSAREREMOVEDFROMTHEMACHINE TOALLOWACCESS FOR CLEANING,ADJUSTING, INSTALLATION, or TESTING OF ANY EQUIPMENT per OSHA (Occupational Safety and Health Administration)

STANDARDS.

“Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper operation.”

«Attention: Lor des opérations d’entretien des commandes étiqueter tous fils avant de les déconnecter. Toute erreur de câblage peut étre une source de danger et de panne.»

CAUTION

DRYERS SHOULD NEVER BE LEFT UNATTENDED WHILE IN OPERATION.

WARNING

CHILDREN SHOULD NOT BEALLOWED TO PLAYON OR NEAR THE DRYERS. CHILDREN SHOULD BE SUPERVISED IF NEAR DRYERS IN OPERATION.

FOR YOUR SAFETY

DO NOT DRYMOP HEADS IN THE DRYER.

DO NOT USE DRYER IN THE PRESENCE OF DRYCLEANING FUMES.

WARNING

UNDER NO CIRCUMSTANCES should the door switch or the heat circuit devices ever be disabled.

Image 3
Contents MLG32PD3 Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Section Procedure for Functional Check Important Information SectionWhat to do if YOU Smell GAS Safety PrecautionsPage Specifications GAS Installation Procedures UNPACKING/SETTING UPLocation of the Dryer Page Fresh AIR Supply Dryer Enclosure RequirementsPage Exhaust Requirements 882099 Page 882099 Electrical Requirements Electrical InformationBlack White Green Electric Service Specifications PER Tumbler GAS Information 23,940 kcal/hr Page Preoperational Tests Preparation for OperationInches Water Column 26.1 mb Basket Coating Shut Down InstructionsStarting the Dryer Operating InstructionsSERVICE/PARTS Information ServiceParts Warranty Information Returning Warranty CardsWarranty Cleaning Routine MaintenanceVoid the Warranty Lubrication AdjustmentsData Label Location Dryer Data Label InformationData Label Serial Number Procedure for Functional Check Replacement Components Part No 1- 11/03/00-50