American Dryer Corp MDG50V installation manual Natural Liquid Propane

Page 28

2.Technical Gas Data a. Gas Specifications

 

 

 

 

 

 

NATURAL

LIQUID PROPANE

 

 

 

 

 

Manifold Pressure*

3.5 inches W.C.

8.7 mb

10.5 inches W.C.

26.1 mb

In-Line Pressure

6.0 - 12.0 inches W.C.

14.92 - 29.9 mb

11.0 inches W.C.

27.4 mb

 

 

 

 

 

Shaded areas are stated in metric equivalents

*Measured at outlet side of gas valve pressure tap when gas valve is on.

b.Gas Connections

Inlet connection ------------- 1/2” N.P.T.

Inlet supply size ------------- 1/2” N.P.T. (minimum)

Heat input (per dryer) ------ 150,000 Btu/hr (37,800 kcal/hr)

1)Natural Gas

Regulation is controlled by the dryer’s gas valve’s internal regulator. Incoming supply pressure must be consistent between a minimum of 6.0 inches (14.92 mb) and a maximum of 12.0 inches (29.9 mb) water column (W.C.) pressure.

2)Liquid Propane (L.P.) Gas

Dryers made for use with L.P. gas have the gas valve’s internal pressure regulator blocked open so that the gas pressure must be regulated upstream of the dryer. The pressure measured at each gas valve pressure tap must be a consistent 10.5 inches (26.1 mb) water column. There is no regulator or regulation provided in an L.P. dryer. The pressure must be regulated at the source (L.P. tank) or an external regulator must be added to each dryer.

 

 

 

 

 

 

 

 

 

Liquid

 

 

 

 

Natural

 

 

Liquid Propane

Propane

MODEL

Btu/hour

kcal/hr

 

 

 

Conversion Kit

NUMBER

Rating

Rating

Qty.

D.M.S.*

Part No.

Qty.

D.M.S.*

Part No.

Part Number

MDG50V

150,000

37,800

3

#29

140820

3

#46

140806

883325

Shaded area is stated in metric equivalent

* Drill Measurement Size (D.M.S.) equivalents are as follows:

Natural Gas

#29 = 0.1360” (3.4540 mm).

Liquid Propane Gas

#46 = 0.810” (2.0574 mm).

24

Image 28
Contents MDG50V Retain This Manual In a Safe Place For Future Reference Important Note to PurchaserFor Your Safety Page Table of Contents Section Procedure for Functional Check of Replacement Important Information Receiving and HandlingSafety Precautions Explosion could ResultPage Specifications SpecificationsSpecifications Installation Procedures UNPACKING/SETTING UPLocation Requirements Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements Single Dryer Venting Vertical Venting Multiple Dryer Common Venting Illus. C Important Venting Reminders Electrical Information Electrical RequirementsSingle-Phase 1ø Wiring Connections/Hookup Must be ProvidedSINGLE-PHASE 1Ø Electrical Connection Leads GroundImportant a Circuit Servicing Each Dryer Must be Provided Service Wire Approx Circuit Phase AMP Draw GAS Information Natural Liquid Propane Page Page Preparation for OPERATION/START-UP Preoperational Tests GAS Models onlyPreoperational Instructions Coin ModelsPage OPL Models Shutdown Instructions Service SERVICE/PARTS InformationParts Returning Warranty Cards Warranty InformationWarranty Cleaning Routine MaintenanceSuggested Cleaning Schedule Adjustments LubricationLint Drawer Removal Troubleshooting StandardsBlower motor is not operating does not start Microprocessor controller computer display reads dSFL GAS Models only Dryer operates but is taking too long to dry Dryer is making scraping noise at basket tumbler area Data Label Information Data LabelSerial Number Procedure for Functional Check Replacement Components

MDG50V specifications

The American Dryer Corp MDG50V is a powerful and efficient tumble dryer that has been expertly designed to meet the demands of commercial laundry facilities. This model is particularly favored for its robust features and innovative technologies that enhance productivity and minimize operational costs.

One of the standout features of the MDG50V is its impressive capacity. With a 50-pound drying capacity, this dryer can handle large loads, making it ideal for laundromats, hotels, and other commercial applications. Its high-performance design ensures that garments are dried thoroughly and efficiently, reducing turnaround time and boosting overall productivity.

The MDG50V incorporates advanced technology to optimize drying performance. Its state-of-the-art control system allows for precise temperature and time settings, enabling users to customize the drying cycle according to the specific needs of various fabrics. This flexibility not only preserves the quality of garments but also contributes to energy savings, as the dryer can be operated at optimal conditions tailored to each load.

Energy efficiency is a key characteristic of the MDG50V. The dryer features a high-efficiency heat exchanger that maximizes heat retention while minimizing energy consumption. This technology not only reduces operational costs but also aligns with environmentally-friendly practices by lowering the carbon footprint of your laundry operations.

The drum design of the MDG50V is another highlight, featuring a spacious and durable construction that facilitates better airflow. This ensures even drying and reduces the risk of overheating, all while allowing for gentler treatment of fabrics. The specially designed lifters within the drum improve the tumbling action, enhancing the drying efficiency and quality of the results.

Maintenance is also made easy with the MDG50V. The unit is designed with accessible components, allowing for simple cleaning and servicing, which further minimizes downtime. Additionally, its rugged construction and high-quality materials ensure a long lifespan, making this dryer a reliable investment for any commercial laundry business.

In conclusion, the American Dryer Corp MDG50V is a top-tier commercial tumble dryer, delivering a powerful combination of capacity, efficiency, and cutting-edge technology. Its user-friendly features, energy-saving capabilities, and exceptional performance make it a valuable asset for any laundry operation seeking to optimize its processes and enhance service quality.