JVC KD-S711R manual Sound Adjustments, Adjusting the sound, Selecting and storing the sound modes

SOUND ADJUSTMENTS

Adjusting the sound 2 Adjust the level.

You can adjust the sound characteristics to your

preference.

1 Select the item you want to adjust.

Each time you press the button, the adjustable items change as

follows:

	BAS		TRE		FAD
	(bass)		(treble)		(fader)
	VOL		LOUD		BAL
(volume)		(loudness)		(balance)

To increase the level.

To decrease the level.

Equalization pattern changes as you adjust the bass or treble.

ENGLISH

Note:

Indication	To do:		Range
BAS	Adjust the bass.	–06 (min.)
		+06 (max.)
TRE	Adjust the treble.	–06 (min.)
		+06 (max.)
FAD*	Adjust the front	R06 (Rear only)
	and rear speaker
	balance.	F06 (Front only)
BAL	Adjust the left	L06 (Left only)
	and right speaker
	balance.	R06 (Right only)
LOUD	Boost low and high
	frequencies to	LOUD ON
	produce a well-
	balanced sound	LOUD OFF
	at low volume
	level.
VOL	Adjust the volume.	00	(min.)
		50	(max.)

*If you are using a two-speaker system, set the fader level to “00.”

Normally the control dial works for volume adjustment. So you do not have to select “VOL” to adjust the volume level.

Using the Sound Control Memory (SCM)

You can select and store a preset sound adjustment suitable for each playback source.

(Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM and CD.

•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM” on page 21.

Select the sound mode you want.

Each time you press the button, the sound mode changes as follows:

BEATSOFT POP SCM OFF

17