OTHER MAIN FUNCTIONS
Setting the clock
You can also set the clock system either 24 hours or 12 hours.
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 20.)
2 Set the hour.
1Select “CLOCK H” if not shown on the
display.
2Adjust the hour.
1 2
3 Set the minute.
1Select “CLOCK M.”
2 Adjust the minute.
1 2
4 Set the clock system.
1Select “24H/12H.”
2Select “24H” or “12H.”
1 2
Changing the general settings (PSM)
You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 20.)
2 Select the PSM item you want to adjust. (See page 20.)
3 Adjust the PSM item selected above.
4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.
5 Finish the setting.
ENGLISH
5 Finish the setting.
To check the current clock time while the unit is turned off, press DISP (display).
The power turns on, the clock time is shown for 5 seconds, then the power turns off.
19