JVC KD-S713R manual Tuning into a preset station, Manual preset, Tune into a station of 88.3 MHz

	Manual preset
ENGLISH
	You can preset up to 6 stations in each band (FM1,
	FM2, FM3 and AM) manually.
	Ex: Storing an FM station of 88.3 MHz into the
	preset number 1 of the FM1 band

1 Select the FM band (FM1 – 3) you want to store FM stations into (in this example, FM1).

•Each time you press the button, the FM band changes as follows:

FM1FM2 FM3

2 Tune into a station of 88.3 MHz.

Press ¢ to tune in stations of higher frequencies.

Press 4 to tune in stations of lower frequencies.

3 Press and hold the number button (in this example, 1) for more than 2 seconds.

“P1” flashes for a few seconds.

4 Repeat the above procedure to store other stations into other preset numbers.

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Tuning into a preset station

You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on page 7.

1 Select the band (AM, FM1 – 3).

FM1FM2 FM3

AM

2 Select the number (1 – 6) for the preset station you want.

8