38. Turn on cold water faucet | 41. Move dryer to final location |
Check that the water faucets are turned on.
39. Check for leaks
Check for leaks around “Y” connector, faucet, and hoses.
Connect vent
40. Connect vent to exhaust outlet
Move dryer to final location, taking care not to crush or kink vent.
After dryer is in place, remove corner posts and cardboard from under dryer.
Level dryer
42. Level Dryer
Place
level here
Using a 4" (102 mm) clamp, connect vent to exhaust outlet in dryer. If connecting to existing vent, make sure vent is clean. Dryer vent must fit over dryer exhaust outlet and inside exhaust hood. Check that vent is secured to exhaust hood with a 4" (102 mm) clamp.
Check levelness of dryer from side to side. Repeat from front to back.
NOTE: The dryer must be level for the moisture sensing system to operate correctly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Not Level |
| LEVEL |
|
| Not Level |
18