Location Requirements, You will need | Maytag W10240579B guide

LOCATION REQUIREMENTS

You will need:

■■ A location allowing for proper exhaust installation. See “Venting Requirements.”

■■ A separate 30 amp circuit.

■■ If using power supply cord, a grounded electrical outlet located within 2 ft. (610 mm) of either side of dryer. See “Electrical Requirements.”

■■ Floor must support dryer weight of 200 lbs. (90.7 kg). Also consider weight of companion appliance.

■■ Cold water faucets located within 4 ft. (1.2 m) of the water fill valves, and water pressure of 20-100 psi (137.9-689.6 kPa). You may use the water supply for your washer using the “Y” connector and short hose (if needed) which are provided.

■■ 20-100 psi (138-690 kPa) for best performance.

■■ Level floor with maximum slope of 1" (25 mm) under entire dryer. If slope is greater than 1" (25 mm), install Extended Dryer Feet Kit, Part Number 279810. If not level, clothes may not tumble properly and automatic sensor cycles may not operate correctly.

For each arrangement, consider allowing more space for ease of installation and servicing; spacing for companion appliances and clearances for walls, doors, and floor moldings. Space must be large enough to allow door to fully open. Add spacing on all sides of dryer to reduce noise transfer. If a closet door or louvered door is installed, top and bottom air openings

in door are required.

DRYER DIMENSIONS

Front view:

27"

(686 mm)

38"

(965 mm)

(25 mm)

* Approx. measurement

Side view:

29"

(736 mm)

271/4"

(695 mm)

			Left or

1 4			right side
36 / "			exhaust
(921 mm)

41/4"

(108 mm)

			101/4"
	1"		101/4"
	1"		(260 mm)
	(25 mm)		(260 mm)
	(25 mm)

W10240579B, W10240583B-SP specifications

The Maytag W10240583B-SP and W10240579B are standout appliance components designed to enhance the performance and reliability of various Maytag washing machines. These model numbers refer to high-quality replacement parts that exemplify the brand's dedication to durability, innovative technologies, and user-centric design.

One of the main features of both the W10240583B-SP and W10240579B is their robust construction. Made from high-grade materials, these components are engineered to withstand the rigors of daily use, ensuring a long lifespan. The parts are built to meet rigorous quality standards, which is particularly important in a home appliance environment where reliability is crucial.

Both parts also integrate advanced technologies that improve washing efficiency. For instance, they are designed to work in synergy with Maytag’s Dynamic Vibration Control system. This technology minimizes noise and vibrations, making laundry days significantly quieter and more pleasant. Such advancements cater to consumers’ needs for tranquility in their homes, echoing broader trends toward quieter home appliances.

Additionally, energy efficiency is a significant characteristic of the W10240583B-SP and W10240579B. These components support the operation of washing machines that are designed to consume less water and energy, which is essential in today's eco-conscious market. By ensuring the optimal functioning of the appliance, these parts play a crucial role in helping users save on utility bills while also being kind to the environment.

Moreover, ease of installation is a hallmark of both models, often requiring merely a few tools and minimal technical know-how. This user-friendly aspect allows homeowners to replace these components without the need for professional assistance, thus saving time and money.

In conclusion, the Maytag W10240583B-SP and W10240579B embody the brand's commitment to quality and performance. With features that enhance durability, noise reduction, energy efficiency, and ease of installation, these components are excellent choices for those looking to maintain their Maytag washing machines in peak condition. As consumers increasingly prioritize reliable and efficient home appliances, Maytag continues to deliver exceptional products that meet these demands.