JVC KD-S680, KD-S700 manual Storing stations in memory, FM station automatic preset SSM

3 Tune into a station you want while “M” is flashing.

Press ¢ to search stations of higher frequencies.

Press 4 to search stations of lower frequencies.

•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.

•If you hold down the button, the frequency keeps changing.

When an FM stereo broadcast is hard to receive:

Press MO RND (monaural/random) while listening to an FM stereo broadcast.

•Each time you press the button, the MO indicator lights up and goes off alternately.

Lights up when receiving an

FM broadcast in stereo.

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)

•Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).

1 Select the FM band (FM1 – 3) you want to store FM stations into.

•Each time you press the button, the FM band changes as follows:

FM1FM2 FM3

2 Press and hold both buttons for more than 2 seconds.

“SSM” appears, then disappears when automatic preset is over.

ENGLISH

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).

To restore the stereo effect, press the same button again.

Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3.) These stations are preset in the number buttons — No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

9