Whirlpool 7LSR8244EQ0 manual Adding liquid fabric softener

OPERATING YOUR WASHER

Adding liquid fabric softener

Models with fabric softener dispenser installed

(5 and 8-cycle models)

1.Add detergent and load clothes into

the basket.

2. Pour liquid fabric softener into the dis- penser using the amount recommended on the package. Avoid dripping or spilling any fabric softener on the load.

3. Dilute fabric softener with warm water. Fill dispenser with warm water until liquid reaches the cross bar in the opening.

4. Start the washer. Diluted fabric softener will be added to the load during the final rinse.

NOTE: Do not stop the washer before the rinse part of the cycle begins. Staining can occur.

5.Flush dispenser periodically with warm

water, as illustrated.

• To remove the dispenser, grasp the top of the dispenser with both hands. Squeeze and push upward with thumbs to remove.

• Clean dispenser by holding under water faucet. Replace after cleaning.

NOTE: Do not wash clothes with this dis- penser removed. Do not add detergent or bleach to dispenser. The dispenser is for liquid fabric softener use only.

Models with no fabric softener dispenser installed

(4-cycle models)

•Always dilute fabric softeners with 125 mL (1⁄2 cup) to 250 mL (1 cup) warm water. Undiluted fabric softener can stain fabrics.

•Add diluted fabric softener only in the final rinse.

•Fabric softeners should not be mixed with other laundry products because greasy stains may form. If stains form, remove by wetting the stain and rubbing with liquid detergent or a bar of soap. Rewash the stained item.

•Too much fabric softener can make some items (diapers and towels) nonabsorbent. If this happens, use less fabric softener,

or use it less often. 15