Service
Fig. 10. Install ball (206) in piston rod. If Loctiter is ap- plied to piston valve threads, ensure that none gets on ball.
Fig. 12. Soak all leather packings in SAE 30W oil for 1 hour minimum prior to assembly. Place male gland
(204)in cylinder. Alternately stack UHMWPE (203) and leather packings (223) (note orientation). Place female gland (224) in top of cylinder. Seat packings.
206
Fig. 10 | 7575A |
|
Fig. 11. Tighten piston valve to piston rod as specified:
Torque to 27
Torque to 55
Torque to 190
(244957)
Torque to 120
| 224 | Not |
|
| used on |
|
| 244197 |
223 | 203 |
|
204 |
|
|
Fig. 12 | 7573B |
|
Fig. 13. Install seal (201) into packing nut (202). Install throat adjustment spacer (228) onto packing nut. Loosely install packing nut into cylinder.
201
202
228
Fig. 11 | 7576A | ti2333a |
Fig. 13 | ||
|
|
309277 7