Service
Repair When Pump Is Off The Sprayer
Disassembling the pump
Fig. 1. Remove packing nut (202) and throat adjust- ment spacer (228).
202
228
Fig. 1 | ti2332a |
|
Fig. 2. Unscrew intake valve from cylinder.
245889, 287946 only
215
236
| 227 |
227 | |
bottom | 244957 only) |
all except |
|
244957) |
|
Fig. 3 | 7570e |
|
Fig. 4. Tap piston rod out of cylinder with a hammer or flip over and tap piston rod out against a bench.
Note: Sleeve may come out of cylinder with piston rod.
Fig. 4 | 7571a |
|
Fig. 5. Remove piston rod from sleeve, or remove sleeve from cylinder.
Fig. 2 | 7569A |
Fig. 3. Disassemble intake valve. Clean and inspect. | Fig. 5 |
| 7572A | ||
|
| ||||
309277 | 5 | ||||
|