Installation
How to connect the PC Input Terminals
COMPUTER
INPUT 4
PC INPUT
Conversion adapter (if necessary)
RGB
VIDEO
D-SUB 15P
PC cable (supplied)
K1HA30DA0003 (2 m)
Audio |
|
Connect a cable that matches | 2 ⋅ RCA plug |
the audio output terminal on the computer. |
|
Signal Names for D-SUB 15P Connector
5 4 3 2 1
10 | 9 |
| 8 | 7 | 6 |
15 |
| 14 | 13 | 12 | 11 |
Pin Layout for PC Input Terminal
Pin No. Signal Name
1R
2G
3B
4GND (Ground)
5GND (Ground)
Pin No. | Signal Name | Pin No. |
6 | GND (Ground) | 11 |
7 | GND (Ground) | 12 |
8 | GND (Ground) | 13 |
9 | NC (not connected) | 14 |
10 | GND (Ground) | 15 |
Signal Name
GND (Ground)
SDA
HD / SYNC
VD
SCL
Notes:
(1)The PC input terminals are
(2)Some PC models cannot be connected to the set.
(3)There is no need to use an adapter for computers with PC / AT compatible
(4)The computer shown in the illustration is for example purposes only.
(5)Additional equipment and cables shown are not supplied with this set.
(6)The picture will become dark if a PC signal with a vertical scanning frequency of 62 Hz is input. To obtain the optimum picture quality with the projection TV, a vertical scanning frequency of 60 Hz is recommended.
(7)Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.
Digital and analog RGB signals that can be input
The table below lists the different types of digital and analog RGB signals that can be input. | ∗ |
|
|
| |||||
If a signal which differs greatly from any of the types listed below is input, the picture | Mark: |
| |||||||
image may not be displayed correctly, or a black background may displayed. | Input signal can be displayed. | ||||||||
|
|
|
|
|
|
|
|
| |
Display mode name | No. of dots (H ⋅ | V) | Horizontal scanning | Vertical scanning |
| DIGITAL | PC INPUT | ||
frequency (kHz) | frequency (Hz) |
|
| IN | (Analog) | ||||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
VGA400 | 640 ⋅ | 400 |
| 31.5 | 70.1 |
|
| ∗ | ∗ |
VGA480 | 640 ⋅ | 480 |
| 31.5 | 59.9 |
|
| ∗ | ∗ |
SVGA | 800 ⋅ | 600 |
| 37.9 | 60.3 |
|
| ∗ | ∗ |
XGA | 1024 ⋅ | 768 |
| 48.4 | 60.0 |
|
| ∗ | ∗ |
MAC16 | 832 ⋅ | 624 |
| 49.7 | 74.6 |
|
|
| ∗ |
720p | 1280 ⋅ | 720 |
| 45.0 | 60.0 |
|
| ∗ |
|
Note:
The number of dots for this set is 800 ⋅ 600 for NORMAL display. Number of dots other than 800 ⋅ 600 in the above data, will be converted to 800 ⋅ 600 (with the exception of MAC 16, which will be displayed in 832 ⋅ 624 dots).
13
