Panasonic PT 52DL52 manual Clock Phase / DOT Clock, Size

PICTURE Adjustment

CLOCK PHASE / DOT CLOCK

CLOCK PHASE and DOT CLOCK are valid only during PC input mode.

When an RGB signal is projected, minor adjustments of the DOT CLOCK frequency and adjustments of the phase can be made.

1

CH

TI
C	O
	N
A
VOL	VOL

CH

2

CH

TI
C	O
	N
A
VOL	VOL

CH

In PICTURE menu press to select PC ADJ.

Press to enter submenu field.

In PC ADJ. submenu field press to select CLOCK PHASE or DOT CLOCK.

Press to adjust the level.

CLOCK PHASE: 0 - +31

DOT CLOCK: -8 - +8

VIDEO ADJ.
OTHER ADJ.
POS ADJ.	16
CLOCK PHASE
PC ADJ.	0
DOT CLOCK
SIZE	2

VIDEO ADJ.
OTHER ADJ.
POS ADJ.	16
CLOCK PHASE
PC ADJ.	0
DOT CLOCK
SIZE	2

CLOCK PHASE:	Phase adjustment.
	Flickering or bleeding of the contour appearing on the screen when projecting a PC signal, can be
	adjusted so that it does not appear.
	During PC setting in DIGITAL-IN input mode, the adjustment range is 0-1.
DOT CLOCK:	Minor adjustments of the dot clock frequency.
	When a PC signal is projected, the display area of the computer image can be adjusted.
	During PC setting in DIGITAL-IN input mode, adjustment is not available.

Note:

The DOT CLOCK advances in increments of 2.

SIZE

SIZE is valid only during 720 ⋅ 1280 RGB signal input in DIGITAL-IN mode.

1

CH

TI
C	O
	N
A
VOL	VOL

CH

2

CH

TI
C	O
	N
A
VOL	VOL

CH

In PICTURE menu press to select PC ADJ.

Press to enter submenu field.

In PC ADJ. submenu field press to select SIZE.

Press to select 1 or 2.

SIZE1: Over scan (Native)

SIZE2: Under scan (compression)

VIDEO ADJ.
OTHER ADJ.
POS ADJ.	16
CLOCK PHASE
PC ADJ.	0
DOT CLOCK
SIZE	2

VIDEO ADJ.
OTHER ADJ.
POS ADJ.	16
CLOCK PHASE
PC ADJ.	0
DOT CLOCK
SIZE	2

32