Humminbird 47, 531338-1_A manual Sonar X-Press Menu, 3D Bottom Zoom, 3D Lower Range

Page 16

M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 30

Sonar X-Press™ Menu

The Sonar X-Press™ Menu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-Press™ Menu.

Sonar X-Press™ Menu

3D Bottom Zoom

(3D Sonar, 3D/2D Sonar Combo Views Only)

3D Bottom Zoom provides a magnified image of the bottom, and is only available on the X-Press™ Menu in the 3D Sonar View and the 3D/2D Sonar Combo View. Use 3D Bottom Zoom to increase the detail of the bottom on the display.

To adjust the 3D Bottom Zoom:

1.Highlight 3D Bottom Zoom on the Sonar X-Press™ Menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the 3D Bottom Zoom setting. (Off, 1.5x, 2x, 2.5x, 3x, Default = Off)

3D Lower Range

(3D Sonar, 3D/2D Sonar Combo, 6-Beam Sonar Views Only)

3D Lower Range sets the deepest depth range that will be displayed, and is only available on the X-Press™ Menu when you are in the 3D Sonar, 3D/2D Sonar Combo, or the 6-Beam Sonar View. Automatic is the default setting. When in automatic mode, the lower range will be adjusted by the unit to follow the bottom. Selecting a specific setting locks the depth range into Manual mode.

For example, if you are fishing in 60 feet of water but are only interested in the first 30 feet (surface to a depth of 30 feet) you should set the Lower Depth Range limit to 30. The display will show the 0 to 30 foot range, allowing you to see a more detailed view than you would see if the display went all the way to the bottom.

To adjust the 3D Lower Range:

1.Highlight 3D Lower Range on the Sonar X-Press™ Menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower Range setting. (AUTO, 10 to 240 feet, 3 to 75 meters [International Models Only], Default = AUTO)

25

26

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Matrix 47 Operations Manual Table of Contents Thank YouAlarms Menu Tab Setup Menu TabViews Menu Tab Accessories Menu Tab Troubleshooting Sonar Menu Tab3D Sonar How Sonar Works2D Sonar Temperature water surface temperature What’s On the Display 3D ViewWhat’s On the Display 2D View Below the cursor3D Sonar View Views3D Sonar View 3D/2D Sonar Combo View Beam Sonar View3D/2D Sonar Combo View Beam Sonar ViewReal Time Sonar RTS Window 2D Sonar View2D Sonar View 2D Zoom View 2D Big Digits View2D Big Digits View 2D Zoom ViewBottom Presentation POWER/LIGHT Key Key FunctionsView Key Menu KeyAccessory Bus Powering Up the UnitMenu System Matrix 47 3D Title ScreenStart-Up Options Menu Normal OperationSelf Test Accessory Test SimulatorSystem Status PC Connect3D Bottom Zoom Sonar X-Press Menu3D Lower Range Reset View 3D History2D Sonar Window Beam SensitivityTo adjust the Upper Range To adjust the Lower RangeUpper Range Lower RangeBottom View Chart SpeedZoom Level Sonar Menu Tab 3D Bottom Style3D Frame Style Beam SelectFish Sensitivity Fish ID+Fish ID 3D Reference To change the RTS Window setting To change the Depth Lines settingDepth Lines Highlight RTS Window on the Sonar main menuSurface Clutter Noise FilterMax Depth Water TypeAlarms Menu Tab Depth AlarmFish ID Alarm To change the Depth Alarm settingLow Battery Alarm Alarm ToneSetup Menu Tab To change the Low Battery Alarm settingUser Mode Units DepthUnits Temp Units DistanceRestore Defaults Triplog ResetSelect Readouts Temp Offset Depth OffsetSpeed Calibration Nmea Output Views Menu TabFollowing Nmea sentences are output To turn Nmea Output on or offAccessories Menu Tab TroubleshootingNegative terminal or ground Fuse is operationalDisplay Problems Problem Possible CauseControl head loses power at high speeds Finding the Cause of NoiseMatrix Fishing System Accessories SpecificationsContact Humminbird
Top Page Image Contents