Humminbird 531338-1_A, 47 manual Nmea Output, Views Menu Tab, Following Nmea sentences are output

Page 29

M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 56

NMEA Output

(Advanced)

NMEA Output turns the NMEA output on or off. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

The following NMEA sentences are output:

DPT . . . . . . . . . . Depth

MTW . . . . . . . . Water Temperature

GLL . . . . . . . . . . Lat/Lon Position

GGA . . . . . . . . . GPS Fix Data

RMC . . . . . . . . . Recommended Minimum Specific GNSS Data

VTG . . . . . . . . . Course Over Ground and Ground Speed

ZDA . . . . . . . . . Time and Date

When navigating, the following NMEA sentences are also output:

APB . . . . . . . . . . Autopilot Sentence B

BWR . . . . . . . . . Bearing and Distance to Waypoint

RMB . . . . . . . . . Recommended Minimum Navigation Info

To turn NMEA Output on or off:

1.Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or Off (On, Off, Default = Off).

Views Menu Tab

From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT 4- WAY Cursor Control key until the Views tab is selected. This menu tab allows you to set the available views to either hidden or visible in the view rotation. The view will be removed from the view rotation if it is set to Hidden and will be displayed in the view rotation if it is set to Visible. The following views are available:

• 2D Sonar View

• 2D Zoom View

• 2D Big Digits View

• 3D Sonar View

• 3D/2D Sonar Combo View

• 6-Beam Sonar View

• Self Test

• Accessory Test.

Views Menu

To Change the View Status of Any View:

1.Highlight the View main menu tab.

2.Use the UP or DOWN 4-WAY Cursor Control keys to select a View.

3.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the status of the view from Hidden to Visible.

51

52

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Matrix 47 Operations Manual Thank You Table of ContentsSetup Menu Tab Alarms Menu TabViews Menu Tab Accessories Menu Tab Troubleshooting Sonar Menu Tab2D Sonar How Sonar Works3D Sonar What’s On the Display 3D View Temperature water surface temperatureBelow the cursor What’s On the Display 2D View3D Sonar View Views3D Sonar View Beam Sonar View 3D/2D Sonar Combo View3D/2D Sonar Combo View Beam Sonar View2D Sonar View 2D Sonar ViewReal Time Sonar RTS Window 2D Big Digits View 2D Zoom View2D Big Digits View 2D Zoom ViewBottom Presentation Key Functions POWER/LIGHT KeyView Key Menu KeyPowering Up the Unit Accessory BusMenu System Matrix 47 3D Title ScreenNormal Operation Start-Up Options MenuSimulator Self Test Accessory TestSystem Status PC Connect3D Lower Range Sonar X-Press Menu3D Bottom Zoom 3D History Reset View2D Sonar Window Beam SensitivityTo adjust the Lower Range To adjust the Upper RangeUpper Range Lower RangeZoom Level Chart SpeedBottom View 3D Bottom Style Sonar Menu Tab3D Frame Style Beam SelectFish ID 3D Reference Fish ID+Fish Sensitivity To change the Depth Lines setting To change the RTS Window settingDepth Lines Highlight RTS Window on the Sonar main menuNoise Filter Surface ClutterMax Depth Water TypeDepth Alarm Alarms Menu TabFish ID Alarm To change the Depth Alarm settingAlarm Tone Low Battery AlarmSetup Menu Tab To change the Low Battery Alarm settingUnits Depth User ModeUnits Temp Units DistanceSelect Readouts Triplog ResetRestore Defaults Speed Calibration Depth OffsetTemp Offset Views Menu Tab Nmea OutputFollowing Nmea sentences are output To turn Nmea Output on or offTroubleshooting Accessories Menu TabNegative terminal or ground Fuse is operationalProblem Possible Cause Display ProblemsControl head loses power at high speeds Finding the Cause of NoiseSpecifications Matrix Fishing System AccessoriesContact Humminbird
Top Page Image Contents