Humminbird 47, 531338-1_A manual Depth Lines, To change the RTS Window setting, Advanced

Page 22

M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 42

Real Time Sonar (RTS®) Window

RTS® Window sets the RTS® Window to either Wide or Narrow, or turns it off in the 3D or 2D Sonar Views. The RTS® Window always updates at the fastest rate possible and only displays returns that are within the transducer beam. (See Real Time Sonar (RTS®) Window for additional detail).

RTS® Window (Wide)

RTS® Window (Narrow)

RTS® Window (Off)

To change the RTS® Window setting:

1.Highlight RTS Window on the Sonar main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the RTS® Window setting. (Wide, Narrow, Off, Default = Wide)

Depth Lines

(Advanced)

Depth Lines divide the display into four equal sections which are separated by three horizontal depth lines. The depth of each line is displayed along the depth scale. You can either turn Depth Lines On or Off. The Depth Lines menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

Depth

Lines

Depth Lines

To change the Depth Lines setting:

1.Make sure you are in Advanced User Mode, then highlight Depth Lines on the Sonar main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Depth Lines setting On or Off. (Off, On, Default = On)

37

38

Image 22

Contents Matrix 47 Operations Manual Table of Contents Thank YouViews Menu Tab Accessories Menu Tab Troubleshooting Alarms Menu TabSetup Menu Tab Sonar Menu Tab3D Sonar How Sonar Works2D Sonar Temperature water surface temperature What’s On the Display 3D ViewWhat’s On the Display 2D View Below the cursor3D Sonar View Views3D Sonar View 3D/2D Sonar Combo View 3D/2D Sonar Combo ViewBeam Sonar View Beam Sonar ViewReal Time Sonar RTS Window 2D Sonar View2D Sonar View 2D Big Digits View 2D Zoom View2D Big Digits View 2D Zoom ViewBottom Presentation View Key POWER/LIGHT KeyKey Functions Menu KeyMenu System Accessory BusPowering Up the Unit Matrix 47 3D Title ScreenStart-Up Options Menu Normal OperationSystem Status Self Test Accessory TestSimulator PC Connect3D Bottom Zoom Sonar X-Press Menu3D Lower Range 2D Sonar Window Reset View3D History Beam SensitivityUpper Range To adjust the Upper RangeTo adjust the Lower Range Lower RangeBottom View Chart SpeedZoom Level 3D Frame Style Sonar Menu Tab3D Bottom Style Beam SelectFish Sensitivity Fish ID+Fish ID 3D Reference Depth Lines To change the RTS Window settingTo change the Depth Lines setting Highlight RTS Window on the Sonar main menuMax Depth Surface ClutterNoise Filter Water TypeFish ID Alarm Alarms Menu TabDepth Alarm To change the Depth Alarm settingSetup Menu Tab Low Battery AlarmAlarm Tone To change the Low Battery Alarm settingUnits Temp User ModeUnits Depth Units DistanceRestore Defaults Triplog ResetSelect Readouts Temp Offset Depth OffsetSpeed Calibration Following Nmea sentences are output Nmea OutputViews Menu Tab To turn Nmea Output on or offNegative terminal or ground Accessories Menu TabTroubleshooting Fuse is operationalControl head loses power at high speeds Display ProblemsProblem Possible Cause Finding the Cause of NoiseMatrix Fishing System Accessories SpecificationsContact Humminbird