Humminbird GR16 manual Save, Edit, or Delete a Waypoint

Page 16

Save, Edit, or Delete a Waypoint

Save your current position as a waypoint: On any view, press the MENU key to display the X-Press™ menu. Select Mark and press the RIGHT Cursor key to save the current position of the boat as a waypoint.

Save the cursor position as a waypoint: On the Track or Combo view, use the Cursor key to designate the position you want to save as a waypoint. Then press the MENU key to display the X-Press™ menu. Select Mark and press the RIGHT Cursor key to save the current position of the boat as a waypoint.

Save a position from the sonar history: On the Sonar view, use the Cursor key to point to a feature in the sonar history (also called the Sonar Saver feature). Then press the MENU key to display the X-Press™ menu. Select Mark and press the RIGHT Cursor key to save the current position of the boat as a waypoint. The new waypoint will also record the depth at that location.

NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is automatically assigned. You can edit the waypoint information later to give it a different name and select an icon to represent it (see Waypoint submenu on the Navigation Main Menu Tab).

Display the Waypoints Submenu: From any view, press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select Waypoints and press the RIGHT Cursor key to display the Waypoints submenu.

Program a specific position as a waypoint: To create a waypoint that is NOT your current position, from the Waypoints submenu, select the Create option and press the RIGHT Cursor key. Use the Cursor keys to program a waypoint name, latitude, longitude, and icon before selecting Save.

Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key to display a list of saved waypoints. Select the waypoint you want to edit and press the RIGHT Cursor key. Use the 4-WAY Cursor Control key to move from field to field, and the UP and DOWN Cursor keys to changes values once you are in a field. In the Waypoint Name, Latitude and Longitude fields, use the UP and DOWN Cursor keys to change the letter or number. All upper and lower case letters are available, as well as digits 0-9 and some punctuation characters. In the Waypoint Icon field, use the UP and DOWN Cursor keys to change the icon used to represent the waypoint on the Combo and Track Views. You can exit these fields with the LEFT and RIGHT Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT Cursor key to save your changes.

11

Page 15 Page 17
Image 16
Page 15 Page 17
Contents GR16 GPS Receiver Accessory Manual Thank You Table of Contents Alarms Menu Tab Troubleshooting GR16 GPS Connection Kit How GPS and Trackplotting WorkConnecting a GR16 GPS Receiver to the Fishfinder Nmea Output GPS Receiver Installation Access under mounting locationNo access under mounting location Shown in the illustrationAccess Under Mounting Location No Access Under Mounting Location Views Bird’s Eye ViewNavigation views Bird’s Eye View Track View Combo ViewTrack View Track View with Active CursorCombo View View OrientationIntroduction to Navigation Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Track View with TargetSave or Clear a Current Track Edit, Delete or Hide Saved TracksMenu System MenuSonar Tab, Normal Mode Sonar Tab, Advanced Mode Normal Operation Start-Up Options MenuSimulator System Status Self TestAccessory Test GPS Diagnostic ViewExit PC Connect mode by powering the Fishing System off PC ConnectSonar X-Press Menu Sonar Views onlyCancel Navigation Only when NavigatingTo Cancel Navigation MarkNavigation X-Press Menu Navigation Views onlyZoom Go ToTo Zoom To Begin NavigationWaypoint Name Only with an active cursor on a waypointTo view the Waypoint Name Submenu Highlight WaypointName on the Navigation X-Press menuChart or Combo view only Cursor to WaypointSave Current Track Clear Current TrackSkip Next Waypoint Remove TargetTo Skip Next Waypoint Only if a Target is ActiveRemove Grid Sonar WindowOnly if a Grid is Active Combo View onlyWaypoint Name Submenu Navigation Menu Tab Current Track Saved TracksWaypoints To view the Waypoints SubmenuHighlight Waypoints on the Navigation main menu Waypoints Submenu contains the following menu choicesTo change the View Orientation setting To change the North Reference settingTo change the Grid Rotation setting North ReferenceTo change the Trackpoint Interval setting To change the Track Minimum Distance settingTrackpoint Interval Track Min DistanceCourse Projection Line Map DatumDelete All Nav Data Alarms Menu Tab Off Course Alarm Arrival AlarmTo change the Off Course Alarm setting To change the Arrival Alarm settingTo change the Drift Alarm setting Drift AlarmHighlight Drift Alarm on the Alarms main menu Setup Menu Tab To change the Units Distance setting To change the Units Speed settingTo Reset Triplog Units DistanceTo change the Daylight Saving Time setting Local Time ZoneDaylight Saving Time To change the Local Time ZoneTo change the Position Format setting Position FormatTime Format Advanced, International onlyDate Format Nmea OutputTo change the Date Format Following Nmea sentences are outputTo turn Nmea Output on or off Troubleshooting Fishing System Doesn’t Power UpDisplay Problems Problem Possible CauseHigh speeds Input voltage does not exceed 20 VoltsFinding the Cause of Noise Possible Source of Noise Isolation Other electronic devicesBoat’s engine PropellerHumminbird Accessories GPS & Navigation Glossary Page Page Page Page Page Contact Humminbird Monday Friday 800 a.m. to 430 p.m. Central Standard Time
Top Page Image Contents