Humminbird GR16 manual Cursor to Waypoint, Save Current Track, Clear Current Track

Page 31

Cursor to Waypoint

(Chart or Combo view only)

Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you can locate it or edit it.

NOTE: This X-Press™ menu item appears only if you have saved waypoints.

To move cursor to a saved waypoint:

1.Highlight Cursor to Waypoint on the Navigation X-Press™ menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.

3.Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you wish to move the cursor to, then use the RIGHT 4-WAY Cusor Control key to select the destination waypoint.

Save Current Track

Save Current Track allows you to save the current track

being displayed. After the current track is saved, a new current track is started.

To Save Current Track:

1.Highlight Save Current Track on the Navigation X-Press™ menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.

3.The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key once more. To cancel saving the current track, press the LEFT Cursor key.

Clear Current Track

Clear Current Track allows you to clear the current track

being displayed and start a new track at the present position.

To Clear Current Track:

1.Highlight Clear Current Track on the Navigation X-Press™ menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.

3.The Confirm dialog box will appear. To clear the current track, press the RIGHT Cursor key once more. To cancel clearing the current track, press the LEFT Cursor key.

26

Image 31

Contents GR16 GPS Receiver Accessory Manual Thank You Table of Contents Alarms Menu Tab Troubleshooting How GPS and Trackplotting Work GR16 GPS Connection KitConnecting a GR16 GPS Receiver to the Fishfinder Nmea Output Shown in the illustration GPS Receiver InstallationAccess under mounting location No access under mounting locationAccess Under Mounting Location No Access Under Mounting Location Bird’s Eye View Track View Combo View ViewsBird’s Eye View Navigation viewsTrack View with Active Cursor Track ViewView Orientation Combo ViewWaypoints, Routes and Tracks Introduction to NavigationSave, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Track View with Target Add a Waypoint Target or Trolling GridEdit, Delete or Hide Saved Tracks Save or Clear a Current TrackMenu Menu SystemSonar Tab, Normal Mode Sonar Tab, Advanced Mode Normal Operation Start-Up Options MenuSimulator Self Test System StatusGPS Diagnostic View Accessory TestPC Connect Exit PC Connect mode by powering the Fishing System offSonar Views only Sonar X-Press MenuMark Cancel NavigationOnly when Navigating To Cancel NavigationNavigation Views only Navigation X-Press MenuTo Begin Navigation ZoomGo To To ZoomHighlight WaypointName on the Navigation X-Press menu Waypoint NameOnly with an active cursor on a waypoint To view the Waypoint Name SubmenuClear Current Track Chart or Combo view onlyCursor to Waypoint Save Current TrackOnly if a Target is Active Skip Next WaypointRemove Target To Skip Next WaypointCombo View only Remove GridSonar Window Only if a Grid is ActiveWaypoint Name Submenu Navigation Menu Tab Saved Tracks Current TrackWaypoints Submenu contains the following menu choices WaypointsTo view the Waypoints Submenu Highlight Waypoints on the Navigation main menuNorth Reference To change the View Orientation settingTo change the North Reference setting To change the Grid Rotation settingTrack Min Distance To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Trackpoint IntervalCourse Projection Line Map DatumDelete All Nav Data Alarms Menu Tab To change the Arrival Alarm setting Off Course AlarmArrival Alarm To change the Off Course Alarm settingTo change the Drift Alarm setting Drift AlarmHighlight Drift Alarm on the Alarms main menu Setup Menu Tab Units Distance To change the Units Distance settingTo change the Units Speed setting To Reset TriplogTo change the Local Time Zone To change the Daylight Saving Time settingLocal Time Zone Daylight Saving TimeAdvanced, International only To change the Position Format settingPosition Format Time FormatFollowing Nmea sentences are output Date FormatNmea Output To change the Date FormatTo turn Nmea Output on or off Fishing System Doesn’t Power Up TroubleshootingInput voltage does not exceed 20 Volts Display ProblemsProblem Possible Cause High speedsPropeller Finding the Cause of NoisePossible Source of Noise Isolation Other electronic devices Boat’s engineHumminbird Accessories GPS & Navigation Glossary Page Page Page Page Page Monday Friday 800 a.m. to 430 p.m. Central Standard Time Contact Humminbird