Humminbird 737 GPS manual Lower Range, Side Beam Range, Chart Speed

Page 26

www..reelschel531438-1 A - 737_EnglishOnlymatic.qxd 9/25/2005..com7:52 PM Page 50

Lower Range

Lower Range sets the deepest depth range that will be displayed. Automatic is the default setting. When in automatic mode, the lower range will be adjusted by the unit to follow the bottom. Selecting a specific setting locks the depth range into Manual mode. Use both Upper and Lower Range together to view a specific depth range manually when looking for fish or bottom structure. M will be displayed in the lower right

corner of the screen when you start manually adjusting the Lower Range to indicate that you are in Manual mode.

For example, if you are fishing in 60 feet of water but are only interested in the first 30 feet (surface to a depth of 30 feet) you should set the Lower Depth Range limit to 30. The display will show the 0 to 30 foot range, allowing you to see a more detailed view than you would see if the display went all the way to the bottom.

NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range regardless of the manual settings entered.

To adjust the Lower Range:

1.Highlight Lower Range on the Sonar X-PressTMMenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower Range setting. (AUTO, 10 to 1500 feet, 3 to 500 meters [International Models only], Default = AUTO)

Side Beam Range

(WideSide® transducer: WideSide® view only)

Side Beam Range sets the deepest range that will be displayed in the WideSide® View. The range must be set manually to keep the bottom visible on the display. If the Side Beam Range is set too deep for current depth conditions the sonar information will become compressed on the display and valuable detail will be lost. A WideSide® transducer must be connected to the 700 Series™ Fishing System. Side Beam Range menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab: Transducer Select) and can only be accessed from the WideSide® view.

NOTE: The Side Beam Range requires the purchase of the WideSide® transducer. You can visit our website at www.humminbird.com to order this accessory online or contact our Customer Resource Center at 1-800-633-1468.

To adjust the Side Beam Range:

1.Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is connected, then highlight Side Beam Range on the Sonar X-PressTMmenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Side Beam Range setting. (6 - 160 feet or 2 - 50 meters [International Models only], Default = 160 feet [50 meters])

Chart Speed

Chart Speed determines the speed at which the sonar information moves across the display, and consequently the amount of detail shown. A faster speed shows more information and is preferred by most anglers; however, the sonar information moves across the display quickly. A slower speed keeps the information on the display longer, but the bottom and fish details become compressed and may be difficult to interpret. Regardless of the Chart Speed setting, the RTS® Window will update at the maximum rate possible for the depth conditions. Adjust Chart Speed to your personal preference.

To adjust the Chart Speed:

1.Highlight Chart Speed on the Sonar X-PressTMMenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Chart Speed setting. (1-9, Ultra, where 1 = Slow, 9 = Fast, Ultra = Fastest, Default = 5)

43

44

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Atic Table of Contents Thank YouKey Functions Views Menu Tab Accessories Menu Tab Peak to Peak measures power output at the highest points How Sonar WorksWideSide Sonar QuadraBeam SonarDualBeam Plus Sonar With optional-purchase WideSide transducerMulti-Media Card MMC/SD Slot Software UpdatesHow GPS and Cartography Work With optional-purchase GPS ReceiverSoft Bottom RTS Real Time Sonar Window 83 kHz, Wide Beam Hollow Fish SymbolWhat’s On the Display Sonar views ViewsSonar View Bottom Presentation Understanding Sonar HistoryReal Time Sonar RTS Window Freeze FrameSonar Zoom View Sonar Zoom ViewCircular Flasher View 200/83 kHz Split Sonar ViewBig Digits View Big Digits View 200/83 kHz Split Sonar ViewMaking a Screen Snapshot Screen Snapshot ViewSide Beam View Screen Capture ViewWideSide View Bird’s Eye ViewCombo View Chart View without Active CursorChart View with Active Cursor DepthViewing Cartography Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Chart View with Grid Add a Waypoint Target or Trolling GridView Key POWER/LIGHT KeyKey Functions Info KeyMark Key Accessory BusWAY Cursor Control Key Goto KeyPresence or absence of a transducer Powering Up the UnitMenu System System Status Start-Up Options MenuNormal Operation SimulatorGPS Diagnostic View Accessory TestExit PC Connect mode by powering the Fishing System off Side To adjust the SideSonar X-PressTMMenu WideSide transducer WideSide view onlySensitivity To adjust the SensitivityTo adjust the Upper Range Upper RangeSide Beam Range Chart SpeedLower Range Bottom Range Cancel NavigationBottom View Bottom LockOnly with an active cursor on a waypoint Navigation X-PressTM MenuWaypoint Name To view the Waypoint Name SubmenuClear Current Track Cursor to WaypointSave Current Track Save Current RouteSonar Window Remove TargetRemove Grid Delete All Images Screen Snapshot X-Press TM MenuDelete Image Sonar Menu TabTo use Beam Select Beam SelectFish ID+TM Highlight Beam Select on the Sonar main menuKHz Sensitivity Fish ID SensitivityZoom Width AdvancedDepth Lines KHz BalanceWideSide Sensitivity Advanced with WideSide transducerMax Depth Surface ClutterNoise Filter Transducer Select To change the Water Type settingWater Type Navigation Menu TabWaypoints Current TrackSaved Tracks North Reference Chart OrientationRoutes Grid RotationCourse Projection Line Track Min DistanceMap Datum Export All Nav DataMap Borders Chart Menu TabChart Detail Level With optional-purchase GPS Receiver onlySet Simulation Position Lat/Lon GridSpot Soundings Set Map OffsetFish ID Alarm Alarms Menu TabDepth Alarm To change the Depth Alarm settingOff Course Alarm Low Battery AlarmTemp Alarm Arrival AlarmSetup Menu Tab Drift AlarmAlarm Tone To change the Drift Alarm settingUnits Temp User ModeUnits Depth Units DistanceSelect Readouts Triplog ResetRestore Defaults Advanced, Sonar view onlySpeed Calibration Depth OffsetTemp Offset Position FormatNmea Output Time FormatDate Format SonarViews Menu Tab Accessories Menu TabUsing Screen Snapshot To Change the View Status of Any ViewTo view screen snapshots TroubleshootingTo make a screen snapshot Screen Snapshot must be enabled Display Problems Finding the Cause of NoiseSeries Fishing System Accessories SpecificationsGlossary Sonar Terms100 Receiver See Transmitter 102104 GPS & Navigation Terms 108 Contact Humminbird
Top Page Image Contents