Humminbird 737 GPS manual Depth Offset, Temp Offset, Speed Calibration, Position Format

Page 47

www..reelschel531438-1 A - 737_EnglishOnlymatic.qxd 9/25/2005..com7:53 PM Page 92

Depth Offset

(Advanced)

Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boat's keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth from the waterline. Enter a negative vertical measurement from the transducer to keel to read the depth from the keel. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Depth Offset setting:

1.Make sure you are in Advanced User Mode, then highlight Depth Offset on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Offset setting. (-10.0 to +10.0 feet or -3 to 3 meters [International Models only], Default = 0)

Temp Offset

(Advanced)

Temp Offset will adjust the temperature readout by the amount entered. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Temp Offset setting:

1.Make sure you are in Advanced User Mode, then highlight Temp Offset on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset setting. (-10.0 to +10.0 degrees, Default = 0)

Speed Calibration

(Advanced, with Temp/Speed only)

Speed Calibration will adjust the speed readout by the percentage entered, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, when the unit is in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Speed Calibration setting:

1.Make sure you are in Advanced User Mode, then highlight Speed Calibration on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed Calibration setting. (-20% to +20%, Default = 0%)

Local Time Zone

(Advanced, with optional-purchase GPS receiver only)

Local Time Zone selects your time zone in reference to the time reported by the GPS receiver when Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts). This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode) and when an optional-purchase GPS receiver is connected.

To change the Local Time Zone:

1.Make sure you are in Advanced User Mode, and have an optional-purchase GPS receiver connected, then highlight Local Time Zone on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Local Time Zone (Default = EST [UTC-5] - Eastern Standard Time).

Daylight Saving Time

(Advanced, with optional-purchase GPS receiver only)

Daylight Saving Time adjusts the time display to account for local Daylight Saving Time when Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts). Selecting On adds one hour to the time display adjusted for your local time zone. Selecting Off leaves the time display as adjusted for your local time zone. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode) and when an optional-purchase GPS receiver is connected.

To change the Daylight Saving Time setting:

1.Make sure you are in Advanced User Mode, and have an optional-purchase GPS receiver connected, then highlight Daylight Saving Time on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight Saving Time On or Off. (Off, On, Default = Off)

Position Format

(Advanced, with optional-purchase GPS receiver)

Position Format selects the format of the latitude and longitude position display. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode) and an optional-purchase GPS Receiver is connected.

To change the Position Format setting:

1.Make sure you are in Advanced User Mode, then highlight Position Format on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format. (dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')

85

86

 

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Atic Thank You Table of ContentsKey Functions Views Menu Tab Accessories Menu Tab How Sonar Works Peak to Peak measures power output at the highest pointsWith optional-purchase WideSide transducer QuadraBeam SonarDualBeam Plus Sonar WideSide SonarWith optional-purchase GPS Receiver Software UpdatesHow GPS and Cartography Work Multi-Media Card MMC/SD SlotSoft Bottom RTS Real Time Sonar Window 83 kHz, Wide Beam Hollow Fish SymbolWhat’s On the Display Sonar views ViewsSonar View Freeze Frame Understanding Sonar HistoryReal Time Sonar RTS Window Bottom PresentationSonar Zoom View Sonar Zoom ViewBig Digits View 200/83 kHz Split Sonar View 200/83 kHz Split Sonar ViewBig Digits View Circular Flasher ViewScreen Capture View Screen Snapshot ViewSide Beam View Making a Screen SnapshotBird’s Eye View WideSide ViewDepth Chart View without Active CursorChart View with Active Cursor Combo ViewWaypoints, Routes and Tracks Viewing CartographySave, Edit, or Delete a Waypoint Add a Waypoint Target or Trolling Grid Chart View with GridInfo Key POWER/LIGHT KeyKey Functions View KeyGoto Key Accessory BusWAY Cursor Control Key Mark KeyPresence or absence of a transducer Powering Up the UnitMenu System Simulator Start-Up Options MenuNormal Operation System StatusGPS Diagnostic View Accessory TestExit PC Connect mode by powering the Fishing System off WideSide transducer WideSide view only To adjust the SideSonar X-PressTMMenu SideUpper Range To adjust the SensitivityTo adjust the Upper Range SensitivitySide Beam Range Chart SpeedLower Range Bottom Lock Cancel NavigationBottom View Bottom RangeTo view the Waypoint Name Submenu Navigation X-PressTM MenuWaypoint Name Only with an active cursor on a waypointSave Current Route Cursor to WaypointSave Current Track Clear Current TrackSonar Window Remove TargetRemove Grid Sonar Menu Tab Screen Snapshot X-Press TM MenuDelete Image Delete All ImagesHighlight Beam Select on the Sonar main menu Beam SelectFish ID+TM To use Beam SelectAdvanced Fish ID SensitivityZoom Width KHz SensitivityAdvanced with WideSide transducer KHz BalanceWideSide Sensitivity Depth LinesMax Depth Surface ClutterNoise Filter Navigation Menu Tab To change the Water Type settingWater Type Transducer SelectWaypoints Current TrackSaved Tracks Grid Rotation Chart OrientationRoutes North ReferenceExport All Nav Data Track Min DistanceMap Datum Course Projection LineWith optional-purchase GPS Receiver only Chart Menu TabChart Detail Level Map BordersSet Map Offset Lat/Lon GridSpot Soundings Set Simulation PositionTo change the Depth Alarm setting Alarms Menu TabDepth Alarm Fish ID AlarmArrival Alarm Low Battery AlarmTemp Alarm Off Course Alarm To change the Drift Alarm setting Drift Alarm Alarm Tone Setup Menu TabUnits Distance User ModeUnits Depth Units TempAdvanced, Sonar view only Triplog ResetRestore Defaults Select ReadoutsPosition Format Depth OffsetTemp Offset Speed CalibrationSonar Time FormatDate Format Nmea OutputTo Change the View Status of Any View Accessories Menu TabUsing Screen Snapshot Views Menu TabTo view screen snapshots TroubleshootingTo make a screen snapshot Screen Snapshot must be enabled Finding the Cause of Noise Display ProblemsSpecifications Series Fishing System AccessoriesSonar Terms Glossary100 102 Receiver See Transmitter104 GPS & Navigation Terms 108 Contact Humminbird
Top Page Image Contents