Humminbird 737 GPS manual Alarm Tone, Setup Menu Tab, To change the Drift Alarm setting

Page 44

www..reelschel531438-1 A - 737_EnglishOnlymatic.qxd 9/25/2005..com7:53 PM Page 86

Drift Alarm

Setup Menu Tab

(with optional-purchase GPS receiver)

Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position, based on the menu setting, and will only appear in the Alarms menu when an optional-purchase GPS receiver is connected. Drift Alarm allows you to set the size of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter, the Drift Alarm will sound.

Drift Alarm Circle

Drift Alarm Perimeter

To change the Drift Alarm setting:

1.Highlight Drift Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm setting. (Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default = Off)

Alarm Tone
Alarm Tone selects the pitch of the alarm sound. A brief tone
will be produced as you adjust the Alarm Tone so that you can select the tone that you can hear		Setup Menu Tab
best.

To change the Alarm Tone setting:

1.Highlight Alarm Tone on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting. (High, Medium, Low, Default = Medium)

From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Setup tab is selected.

NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode and what accessories are attached to the unit.

79

80

Image 44

Contents Atic Table of Contents Thank YouKey Functions Views Menu Tab Accessories Menu Tab Peak to Peak measures power output at the highest points How Sonar WorksQuadraBeam Sonar DualBeam Plus SonarWideSide Sonar With optional-purchase WideSide transducerSoftware Updates How GPS and Cartography WorkMulti-Media Card MMC/SD Slot With optional-purchase GPS ReceiverSoft Bottom RTS Real Time Sonar Window 83 kHz, Wide Beam Hollow Fish SymbolWhat’s On the Display Sonar views ViewsSonar View Understanding Sonar History Real Time Sonar RTS WindowBottom Presentation Freeze FrameSonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View Big Digits ViewCircular Flasher View Big Digits View 200/83 kHz Split Sonar ViewScreen Snapshot View Side Beam ViewMaking a Screen Snapshot Screen Capture ViewWideSide View Bird’s Eye ViewChart View without Active Cursor Chart View with Active CursorCombo View DepthViewing Cartography Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Chart View with Grid Add a Waypoint Target or Trolling GridPOWER/LIGHT Key Key FunctionsView Key Info KeyAccessory Bus WAY Cursor Control KeyMark Key Goto KeyPresence or absence of a transducer Powering Up the UnitMenu System Start-Up Options Menu Normal OperationSystem Status SimulatorGPS Diagnostic View Accessory TestExit PC Connect mode by powering the Fishing System off To adjust the Side Sonar X-PressTMMenuSide WideSide transducer WideSide view onlyTo adjust the Sensitivity To adjust the Upper RangeSensitivity Upper RangeSide Beam Range Chart SpeedLower Range Cancel Navigation Bottom ViewBottom Range Bottom LockNavigation X-PressTM Menu Waypoint NameOnly with an active cursor on a waypoint To view the Waypoint Name SubmenuCursor to Waypoint Save Current TrackClear Current Track Save Current RouteSonar Window Remove TargetRemove Grid Screen Snapshot X-Press TM Menu Delete ImageDelete All Images Sonar Menu TabBeam Select Fish ID+TMTo use Beam Select Highlight Beam Select on the Sonar main menuFish ID Sensitivity Zoom WidthKHz Sensitivity AdvancedKHz Balance WideSide SensitivityDepth Lines Advanced with WideSide transducerMax Depth Surface ClutterNoise Filter To change the Water Type setting Water TypeTransducer Select Navigation Menu TabWaypoints Current TrackSaved Tracks Chart Orientation RoutesNorth Reference Grid RotationTrack Min Distance Map DatumCourse Projection Line Export All Nav DataChart Menu Tab Chart Detail LevelMap Borders With optional-purchase GPS Receiver onlyLat/Lon Grid Spot SoundingsSet Simulation Position Set Map OffsetAlarms Menu Tab Depth AlarmFish ID Alarm To change the Depth Alarm settingLow Battery Alarm Temp AlarmOff Course Alarm Arrival AlarmDrift Alarm Alarm ToneSetup Menu Tab To change the Drift Alarm settingUser Mode Units DepthUnits Temp Units DistanceTriplog Reset Restore DefaultsSelect Readouts Advanced, Sonar view onlyDepth Offset Temp OffsetSpeed Calibration Position FormatTime Format Date FormatNmea Output SonarAccessories Menu Tab Using Screen SnapshotViews Menu Tab To Change the View Status of Any ViewTo view screen snapshots TroubleshootingTo make a screen snapshot Screen Snapshot must be enabled Display Problems Finding the Cause of NoiseSeries Fishing System Accessories SpecificationsGlossary Sonar Terms100 Receiver See Transmitter 102104 GPS & Navigation Terms 108 Contact Humminbird