Testing the Installation

After installation is complete and all connections are made, you are ready to test the installation prior to actual use. Thorough testing should be performed with the boat in water, however, you can initially confirm basic operation with the boat trailered.

Press POWER once to turn the unit on. There will be an audible chirp when any button is pressed that confirms the button press. If the unit does not power-up, ensure that the unit is fully seated on the mount and that power is available.

The first screen provides four options; Start-up, Options, Simulator, and Diagnostic. If there is no transducer detected, only the Simulator, Options and Diagnostic will appear as menu options. The time remaining before the screen "times-out" is shown at the bottom of the screen. If you do not press any button before the timer reaches 0, the normal operation screen will be displayed. If the boat is on-water, sonar data will begin to appear. If no transducer is connected or detected, the Optic will go into simulator mode after the initial menu screen times out.

Note: The transducer must be submerged in water for reliable transducer detection.

If the bottom is visible on-screen with a digital depth readout, the unit is working properly. If the unit powers-up but fails to display bottom information, the transducer is not properly connected. Ensure that the boat is in water greater than 2' but less than 600' deep, and that the transducer is fully submerged. Remember that the sonar signal cannot pass through air. Refer to the troubleshooting section of this manual. If the unit is working properly, gradually increase the boat speed to test high-speed performance. If the unit functions well at low speeds but begins to skip or miss the bottom at higher speeds, the transducer installation requires adjustment. Refer to the appropriate transducer installation section for more detail.

NOTE: It is often necessary to make several incremental transducer adjustments before optimum high- speed performance is achieved.

Tour Series specifications

The Humminbird Tour Series stands out as a premier line of fish finders and sonars, designed specifically for anglers seeking advanced technology and durability on the water. Renowned for their high performance, the Tour Series incorporates cutting-edge features tailored for serious fishing enthusiasts.

One of the hallmark features of the Humminbird Tour Series is its superior imaging capabilities. The series boasts the latest in sonar technology, including Side Imaging and Down Imaging, which provide incredible detail and clarity below and beside the boat. This advanced sonar allows anglers to identify fish, structures, and underwater vegetation with unmatched precision, transforming the fishing experience into a more strategic and informed endeavor.

Another significant attribute of the Tour Series is its GPS capability. Equipped with Humminbird’s proprietary LakeMaster and Navionics maps, these devices allow users to navigate with confidence. The integration of GPS also enables the creation of custom waypoints, routes, and tracks, enhancing connectivity to fishing hotspots. The AutoChart Live feature lets anglers create real-time maps of their fishing spots that highlight depth contours and bottom hardness, offering a customized view of their fishing environment.

The Tour Series is built to withstand the demanding conditions of fishing. With a rugged design and a bright, sunlight-readable display, these fish finders ensure visibility in various environments. The touchscreen interface is intuitive and responsive, allowing for easy adjustments on the fly. Additionally, the models are equipped with a robust transducer system that can achieve impressive depths and deliver accurate readings even in challenging waters.

The integration of the 360 Imaging feature is another standout characteristic. This capability offers a complete panoramic view of the water around the boat, providing additional data on fish and structure location. The ability to see a complete picture of the surroundings allows anglers to make better decisions in real time.

Lastly, the Tour Series doesn’t compromise on connectivity. With built-in Bluetooth and networking capabilities, anglers can connect multiple devices simultaneously and share data seamlessly. Whether you are monitoring multiple fishing rods or collaborating with fellow anglers, the Tour Series provides the tools necessary to enhance your fishing excursions.

In summary, the Humminbird Tour Series combines advanced sonar technology, comprehensive GPS mapping, durable construction, and connectivity features, making it a leader in the fishing electronics market. For passionate anglers, it delivers not just tools, but a profound understanding of their aquatic environment.