Humminbird 531444-1_A, 323, 300 series manual Select Readouts, Depth Offset, Temp Offset

Page 29

531444-1_A - 323_Man_English.qxd 11/5/2005 12:34 PM Page 56

Select Readouts

(Advanced, Sonar view only)

Select Readouts sets individual digital readouts on the Sonar View. This Advanced feature allows you to select what data will be displayed in each of 5 fixed-position data windows arranged around the left and bottom edges of the Sonar View screen, or whether a particular window will be turned off, displaying nothing in that area; you can access this menu choice only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

Data windows can display readouts from supported accessories such as Temp/Speed. Each data window can either be empty or contain one of the following:

-Speed (will be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once)

-Temperature

-Triplog (will be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once)

Select Readouts

-Voltage

-Water Speed (will only be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once).

Depth Offset

(Advanced)

Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boat's keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth from the waterline. Enter a negative vertical measurement from the transducer to keel to read the depth from the keel. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Depth Offset setting:

1.Make sure you are in Advanced User Mode, then highlight Depth Offset on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Offset setting. (-10.0 to +10.0 feet or -3 to 3 meters [International Models only], Default = 0)

Temp Offset

(Advanced)

Temp Offset will adjust the temperature readout by the amount entered. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Temp Offset setting:

1.Make sure you are in Advanced User Mode, then highlight Temp Offset on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset setting. (-10.0 to +10.0 degrees, Default = 0)

49

50

Image 29
Contents Operations Manual Thank You Table of ContentsSetup Menu Tab Alarms Menu TabTroubleshooting Specifications Glossary Contact HumminbirdHow Sonar Works DualBeam Plus Sonar Soft Bottom RTS Real Time Sonar Window What’s On the DisplayBait Ball Hard Bottom Rocky Bottom Temperature water Do Not print this Sonar View ViewsFreeze Frame Understanding Sonar HistoryReal Time Sonar RTS Window Bottom Presentation 200/83 kHz Split Sonar View Sonar Zoom ViewBig Digits View POWER/LIGHT KeyKey Functions Circular Flasher ViewMenu Key Powering Up the UnitWAY Cursor Control Key Exit KeyMenu System Sonar Tab, Normal Mode Sonar Tab, Advanced ModeSimulator Start-Up Options MenuNormal Operation Exit System Status by powering your Fishing System off Accessory Test lists the accessories connected to SystemSystem Status Sonar X-PressTMMenu Operation and the input voltageTo adjust the Upper Range To adjust the SensitivitySensitivity Upper RangeTo adjust the Lower Range Chart SpeedTo adjust the Chart Speed Lower RangeBottom Range Zoom LevelBottom Lock Beam Select Sonar Menu TabTo use Beam Select Highlight Beam Select on the Sonar main menuTo change the RTS Window setting To change the Fish ID Sensitivity settingFish ID+TM Fish ID SensitivityDepth Lines Zoom WidthKHz Sensitivity Max Depth Surface ClutterNoise Filter Water Type Alarms Menu TabTo change the Water Type setting Fish ID Alarm Depth AlarmLow Battery Alarm Temp AlarmSetup Menu Tab Alarm ToneTo change the Alarm Tone setting Highlight Alarm Tone on the Alarms main menuUnits Depth User ModeUnits Temp Units DistanceSelect Views Triplog ResetRestore Defaults Temp Offset Select ReadoutsDepth Offset Speed Calibration TroubleshootingTo change the Speed Calibration setting Problem Possible Cause Display ProblemsFinding the Cause of Noise IsolationSonar Terms SpecificationsGlossary 531444-1A 323ManEnglish.qxd 11/5/2005 1234 PM 531444-1A 323ManEnglish.qxd 11/5/2005 1234 PM Receiver See Transmitter 531444-1A 323ManEnglish.qxd 11/5/2005 1234 PM Contact Humminbird