Teledyne 760 PLUS instruction manual Specifications, Output signal options

1.2. Specifications

Piezo Vacuum Transducer (760s):
Accuracy	± 0.25% FS* (760 Torr)
Operating pressure	1000 Torr (nominal)
Maximum over pressure	2300 Torr(45 psi)
Operating temperature	0-50°C
Input voltage	15-30 VDC
Input power	15 mA @ 24 VDC (no load)
Output impedance	1k ohm minimum
Output signal options:
Option-01	0-1000 Torr @ 0-5 VDC
Option-02 Std	0-1000 Torr @ 0-10 VDC
Option-03	0-1000 Torr @ 2-10 mA
Option-04	0-1000 Torr @ 4-20 mA
Option-05	0-1000 Torr @ 5 or 10 VDC w/digital display
Size	1.5”x 1.5”x 2.875”
Wetted material(s)	316 stainless steel
Power Supply/Display:
Digital display	± 0.05% of reading ± 1 digit
Temperature coefficient	< 80 ppm/°C
Input power	120 or 240 volts AC, 50 ma, 50/60 hz
Output power	24 VDC no regulated @ 30 mA
Input signal	0-10 VDC (nominal)
Relay(s)	2A @ 240 VAC form C
Size	1.9”x 3.8”x 4.6”

* Accuracy 0.25% FS (calibration based on a 0.15% RDG standard)

Manual: 147-082010_HPM-760-Plus-Vacuum-Gauge Page 5 of 16