13Audio Settings and Video Adjust menu
Chapter 13
Audio Settings and Video Adjust menu
Audio Settings menu
EV500 only1
The Audio Settings menu offers features for adjusting the way discs sound.
1Press HOME MENU and select ‘Audio Settings’ from the
Audio Settings
2Select and change settings using the (cursor) buttons, and ENTER.
Virtual Surround
• Settings: On, Off (default)
Switch on Virtual Surround to enjoy realistic surround sound effects from just two
speakers.3
Video Adjust menu
From the Video Adjust screen you can adjust various settings that affect how the picture is presented.
1Press HOME MENU and select ‘Video Adjust’ from the
Audio DRC
•Settings: Low, Medium, High, Off (default)
When watching Dolby Digital DVDs at low volume, it’s easy to lose the quieter sounds
How much of a difference you hear depends on the material you’re listening to. If the material doesn’t have wide variations in volume, you
may not notice much change.2
Video Adjust
2Make settings using the (cursor) buttons and ENTER.
You can adjust the following picture quality settings:
•Sharpness – Adjusts the sharpness of edges in the picture (Fine, Standard, Soft)
•Brightness – Adjusts the overall brightness
•Contrast – Adjusts the contrast between light and dark
•Gamma – Adjusts the ‘warmth’ of the picture (High, Medium, Low, Off).
•Hue – Adjusts the red/green balance (Green 9 to Red 9).
Note
1For the EV700/1000 model, seeDynamic Range Control in System Setup menu options on page 24 (this method of adjustment is also available for the EV500 model, but an extra setting of LOW also appears).
2• Audio DRC is only effective with Dolby Digital audio sources.
•The effect of Audio DRC also depends on your speakers and settings.
3• 96kHz Linear PCM audio is automatically downsampled to 48kHz if Virtual Surround is switched on.
•How good the surround effect is varies with the disc.
42
En