Additional information | 15 |
Cleaning the pickup lens
The DVD player’s lens should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer authorized service center. Although lens cleaners are commercially available, we do not recommend using them since some may damage the lens.
Problems with condensation
Condensation may form inside the player if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although this won’t damage the player, it may temporarily impair performance. You should leave it to adjust to the warmer temperature for about an hour before switching on.
Moving the system unit
If you need to move the main unit, first remove a disc if there’s one in the player, then press STANDBY/ON on the front panel to turn the system off. Wait for GOOD BYE to disappear
from the display, then unplug the power cord.1 Never lift or move the unit during playback— discs rotate at high speeds and may damage.
Resetting the system
Use this procedure to reset all system settings to the factory default. Use the front panel controls to do this.
1 Switch the system into standby.
2 | Press and hold the (stop) button for | ||
about 7 seconds until the display shows | |||
‘MEM.CLR?’ |
| ||
Use | or | to select it if it does not show | |
in the display. |
| ||
3 | Press the | button. | |
All the system’s settings are now reset, and you should see Welcome in the front panel display.
Note
1 Unplugging the unit before GOOD BYE disappears from the display may cause the system to return to the factory settings.
English Deutsch Français Italiano Nederlands Español
53
En