Pioneer XV-EV500 Using the timer Setting the record timer, Turning the record timer on/off

Using the timer

Setting the record timer

You can set the timer to record from the LINE source, or something off the radio. For example, you might want to record a program

that is broadcast while you're at work.1

1 Set up the tape deck.

Load a cassette tape, wind on past the leader tape and set the reverse mode (see Making tape recordings on page 35 for more on this).

2Select the source you want to record. Press FM/AM (TUNER on the front panel) or LINE and prepare the source.2

3Press TIMER (SHIFT+6) twice, use

to select REC then press ENTER.

4 Use	to select EDIT then press
ENTER.

5 Set the switch-on time.

Use to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.

6 Set the switch-off time.

Set as above, pressing ENTER when done. The REC indicator lights, then the switch-on, switch-off times and the function (or frequency, if you selected the tuner) are confirmed in the display.

7Switch the system into standby mode. The record timer will not work if the system is left on!

12

English Deutsch Français Italiano Nederlands Español

Turning the record timer on/off

If you have already set the record timer, you can switch it on/off by selecting REC ON or REC OFF in step 4 above (press ENTER).

Note

1• During the actual recording, the volume is automatically set to minimum. After the recording has finished, the record timer is canceled.

• You cannot have the record timer and the wake-up timer set at the same time.

2For example, if you select the tuner, tune in the station you want to record (seeListening to the radio on page 21).

41

En