7Using the numeric keypad, enter the time on which you wish the transmission to begin.

Tip: Be sure to enter the time using the 24-hour clock (i.e., 8:00 a.m. would be entered as 08:00, and 8:00 p.m. would be entered as 20:00).

8Press YES . The display shows SELECT LOCATIONS.

9Select a location. Refer to the instructions below.

To Select Using

Do This

A One-Touch key

Press the One-Touch key.

An Auto Dial number

Press the AUTO DIAL key, then enter the three digit

 

Auto Dial number on thenumeric keypad.

A number dialed on

Dial as you would on a normal telephone.

the numeric keypad

 

10Press the START key to finish the programming.

Canceling a Delayed Transmission

To cancel a delayed transmission from the document feeder or from memory before it has been sent, follow the instructions below.

1Press the STOP key. The display shows COMMUNICATION CAN- CEL.

2Press YES . The display shows the Location ID of the delayed transmission currently loaded in your MFP machine.

3 Press YES .

4If the delayed transmission was a feeder transmission, press the STOP key again to remove the document from the document feeder.

Advanced Operations 55

Page 67
Image 67
Oki 87 manual Canceling a Delayed Transmission