Oki 87 manual Enter a unique character

5After the display clears, enter the full telephone number of your MFP machine using the numeric keypad.

Tip: Use the Hyphen key to enter a “+” character before the num- ber, and use the Space One-Touch key to enter spaces.

6Press the START key to save your entry.

7Enter your Sender ID. This is a descriptive title up to 32 characters long. Refer to the instructions below.

To Do This	Use
Enter numbers	Numeric keypad (press once)
Enter spaces	9/SPACE One-Touch key
Enter hyphens	HYPHEN key
Enter alphabet characters	Locate the character you want on the numeric keypad.
	Press that key repeatedly until the character appears.
Enter a unique character	Press the 0/UNIQUE key repeatedly until the character
	you want appears.
	The following characters are available: ! @ \ “ _ % ~ #
	& ‘ ( ) * + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.
	Note: Some unique characters can be inputted using
	One-Touch keys.

Move the cursor to make corrections.

YES

and

NO .

8Press the START key to save your entry. The display shows NO=<CALL BACK NO.>.

9After the display clears, use the numeric keypad to enter the tele- phone number you want to use for call back messages. Enter up to 20 characters.

Tip: Use the HYPHEN key to enter a “+” character before the number, and use the SPACE One-Touch key to enter spaces.

10Press the START key to save your entry.

11Press the SELECT FUNCTION key to finish.

Installation 25