Chain Dialing

Each fax number that you enter or program into your MFP machine can be up to 40 digits long. when it is necessary to dial a number which is longer than 40 digits, use the chain dial feature.

To create a chain dial number, program the first 31 digits of the number into a One-Touch key or Auto Dial number. Then press the 8/+ One-Touch key to make this a chain dial number. Next, program the rest of the number into another One-Touch key or Auto Dial number (or, you can leave the second part of the number unprogrammed and enter it manually on the numeric keypad).

To use a chain dial number, select the One-Touch key or Auto Dial num- ber programmed with the first part of the chain dial number. The display shows PRESS OT/AD/SRCH KEY. Then select the One-Touch key or Auto Dial number programmed with the second part of the chain dial number. If the second part of the chain dial number was not programmed, enter it manually on the numeric keypad. Press the START key to begin sending the fax.

Dial Directories 35

Page 47
Image 47
Oki 87 manual Chain Dialing