Initiating a Relay Broadcast

1Load your documents.

2Press the SELECT FUNCTION key.

3Press the 4/RELAY INIT.-TX One-Touch key. The display shows

RELAY PASSWORD.

4Using the numeric keypad, enter a password of up to 20 digits which is the same as the relay keyword programmed into the relay key station.

5Press the START key. The display shows REMOTE LIST NO.

6Using the numeric keypad, enter a number of up to 20 digits which corresponds to a relay group programmed into the relay key station.

7Press the START key. The display shows SELECT LOCATION.

8Select the location of the relay key station. Refer to the instructions below.

To Select Using

Do This

A One-Touch key

Press the One-Touch key.

An Auto Dial number

Press the AUTO DIAL key, then enter the three digit

 

Auto Dial number on the numeric keypad.

A number dialed on

Dial as you would on a normal telephone.

the numeric keypad

 

9Press the START key. Your MFP machine begins sending the fax.

Advanced Operations 61

Page 73
Image 73
Oki 87 manual Initiating a Relay Broadcast, Relay Password