2Plug the unattached end of the power cord into a grounded AC power outlet.

3Turn the power switch to ON.

The time and current answering mode appears on the display. Your MFP machine is now in standby mode, ready to send or receive faxes.

Tip: The LCD display does not immediately disappear if the power is turned off while idling in the Power Save mode. This is not a malfunction and the display disappears momentarily.

Loading Paper

Your MFP machine can hold up to 100 sheets of standard-weight (20 lb.) paper. For best results, use paper specially made for laser printers or photocopiers. Available sizes are A4, letter size and legal size.

Your MFP machine automatically reduces the vertical length of the page images it receives to fit on the paper loaded in your MFP machine (down to 75% of the original length). For example, if you are sent a document created originally on legal-size paper, your MFP machine can reduce the received pages to fit on A4 or letter-size paper.

Tip: Your MFP machine is set at the factory to use letter size paper. If you intend to use a different paper size, change the PAPER SIZE user function setting to match your new paper size. See the Programming chapter for instructions.

1Adjust the paper guides to the width of your paper.

Tip: Adjust the paper guide on the right side to the mark of the width of your paper. After completing paper setting (Item 3), the paper guide on the left side should be aligned to the paper’s width.

20 OKIOFFICE 87 User’s Guide

Page 32
Image 32
Oki 87 manual Loading Paper