25 Instant Dial = OFF, 17 Mem./Feeder SW = FEEDER:

Memory Available—Feeder transmission : starts reading docu- ment when receiving the CFR signal of the remote machines after call origination.

Memory Full—Feeder transmission : starts reading document when receiving the CFR signal of the remote machines after call origination.

26 RESTRICT ACCESS: Select whether or not you want restricted access. Turning on this function renders your restricted ID registration active. Available settings are on and off.

Important! You cannot generate a report listing the Restrict Access IDs. Be sure to record all Restrict Access IDs. If you forget a Restrict Access ID, you must contact an Authorized Service Dealer for assistance.

27 WIDTH REDUCTION: Turning this function on enables you to print received data at a slightly reduced width.

28 TONER SAVE: This function allows you to select whether to use toner saving during facsimile printing. The settings are on and off.

29 CNG COUNT: This function allows you to switch to a facsimile reception mode at a certain CNG signal quantity (1-5) when the unit is operating in T/F, TAD and as a parallel telephone.

Programming 71

Page 83
Image 83
Oki 87 manual Instant Dial = OFF, 17 Mem./Feeder SW = Feeder