Oki 87 manual Change the setting

8Enter the Location ID. This is a descriptive title up to 15 characters long. Refer to the instructions below.

To Do This	Use
Enter numbers	Numeric keypad (press once)
Enter spaces	SPACE One-Touch key
Enter hyphens	HYPHEN key
Enter alphabet characters	Locate the character you want on the numeric keypad.
	Press that key repeatedly until the character appears.
Enter a unique character.	Press the 0/UNIQUE key repeatedly until the character
	you want appears.
	The following characters are available: ! @ \ “ _ % ~ # &
	‘ ( ) * + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.
	Note: Some unique characters can be entered using
	one-touch keys.
Enter two letters	Press		to move to the next character.
		NO
using the same key.

Move the cursor to make corrections.

YES

and

NO

9The display shows G3 COMMUN. SPEED [33.6K]. Press NO

to adjust the speed and YES to select it.

10The display shows G3 ECHO Protection [ON]. Press NO to

change the setting and YES to select it.

11Press the START key to finish programming the One-Touch key. The display shows AUTO DIAL NO. [ ].

12To continue programming Auto Dial numbers, go back to Step 4. If you are finished programming, press the SELECT FUNCTION key.

Note: When programming a telephone number, the ID and

communication parameters are unnecessary.

Dial Directories 37