15Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
•If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.
General
ProblemRemedy
The power does not turn on.
•Connect the power plug to the wall outlet.
•Disconnect the power plug from the outlet, and insert again.
•Make sure the power source is the right voltage for the AC inlet.
The power suddenly switches off | • If the speaker cables aren’t connected properly, the system has a |
automatically and won’t switch | safety feature that shuts the power off automatically. Check the |
back on for a minute or so. Also, | speaker wires to make sure they’re connected properly. If there |
the timer indicator is blinking. | appears to be nothing wrong, try switching the power back on after |
| the timer indicator has been blinking for a minute or so. |
| • If you can’t seem to switch the power back on after the timer |
| indicator has been blinking for over a minute, the unit may be |
| malfunctioning. Take it to your nearest Pioneer authorized service |
| center or your dealer to carry out repair work. |
|
|
No sound is output when a | • If you’re using the LINE input, make sure the component is |
function is selected. | connected correctly (see Connecting auxiliary components on |
| page 12). |
| • Press MUTE on the remote control to turn muting off. |
| • Adjust the volume. |
|
|
No image is output when | • Make sure the TV is connected correctly (see Connecting to your |
watching discs. | TV on page 11). |
|
|
System does not output digital | • As a |
audio at 96kHz. | audio. In this case, even if 96 kHz is selected, the player |
| automatically outputs the audio at 48 kHz. This is not a |
| malfunction. |
Can’t operate the remote control. • Replace the batteries (see Loading the batteries on page 6).
•Operate within 23 feet (7 m), 30° of the remote sensor on the front panel (see Range of the remote control unit on page 6).
•Remove the obstacle or operate from another position.
•Avoid exposing the remote sensor on the front panel to direct light.
54
En