NEC PX-61XM3G user manual Wide Operations, When viewing videos or digital video discs

Page 15

E-114-15

WIDE Operations

CONFIDENTIAL

Wide Screen Operation (manual)

With this function, you can select one of six screen sizes.

When viewing videos or digital video discs

1.Press the WIDE button on the remote control.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

→ NORMAL → FULL → STADIUM → ZOOM → 2.35:1 → 14:9

When a 720P or 1080I signal is input:

FULL ↔ 2.35:1

When displaying enhanced split screen:

NORMAL ↔ FULL

NORMAL size screen (4:3)

The normal size screen is displayed.

*The picture has the same size as video pictures with a 4 : 3 aspect ratio.

FULL size screen

The image is expanded in the horizontal direction.

*Images compressed in the horizontal direction (“ squeezed images” ) are expanded in the horizontal direction and displayed on the entire screen with correct linearity. (Normal images are expanded in the horizontal direction.)

STADIUM size screen

The picture is expanded in the horizontal and vertical directions at different ratios.

*Use this for watching normal video programs (4:3) with a wide screen.

ZOOM size screen

2.35:1 size screen

Original image Information is lost on both sides.

The squeezed film image is expanded to fulfill the entire screen at a ratio of 2.35:1. Black bands do not appear at the top and bottom but information is lost on the left and right margins.

•This feature is available when the input signal is video, component (480I, 480P, 576I, 576P, 720P, 1080I) or RGB

(525P or 625P signal from a scan converter).

*If black bands appear on the top and bottom in the full size screen, select the 2.35:1 size screen to avoid phosphor burn-in.

14:9 size screen

The image is displayed at a 14:9 aspect ratio.

*This feature is available when the input signal is video, component (480I, 480P, 576I, 576P) or RGB (525P or 625P signal from a scan converter).

Note:

Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor burn-in.

The picture is expanded in the horizontal and vertical

direction, maintaining the original proportions. Downloaded From TV-Manual.com Manuals

* Use this for theater size (wide) movies, etc.

Image 15

Contents PlasmaSync Plasma Monitor Signals HD/DVD/DTV input signals supported on this systemSupported resolution Table of Signals SupportedImportant Information English Deutsch Français Español Italiano Important Information PrecautionsContents Ventilation Requirements for enclosure mounting InstallationCables Video signal RGB/DVD/HD signalCreating a video wall Cable ManagementHandling the remote control How to use the remote controlBattery Installation and Replacement Using the wired remote control modeFront View Part Names and FunctionRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discsTrue When Picture Size is set to OFF Supported resolution Picture Size settingOperations in the Side-by-side mode Split Screen OperationsShowing a couple of pictures on the screen at the same time Zooming up pictures Operations in the Picture-in-picture modeSelecting the input signals to be displayed Adjusting the OSM controlsMenu Operations Advanced menu modeMenu Tree ResetLanguage Restoring the factory default settingsReducing noise in the picture Picture Settings MenuAdjusting the picture Setting the color temperatureChanging the Gamma Curve Adjusting the color to the desired levelMaking the Low Tone adjustments Adjusting the colorsAdjusting the Position, Size, Fine Picture, Picture Adj Audio Settings MenuImage Adjust Settings Menu Setting the allocation of the audio connectorsSetting the RGB1 connector Option1 Settings MenuSetting the on-screen menu Setting the BNC connectorsSetting the Input Skip Resetting to the default valuesSetting high definition images to the suitable screen size POWER/STANDBY indicator Option2 Settings MenuSetting the power management for computer images Setting the picture to suit the movieSetting the time Orbiter settingsInverse Settings Orbiter Function settingsGray Level settings Setting the gray level for the sides of the screenSetting the screen size for S1/S2 video input Soft Focus settingsUsing the timer Option3 Settings MenuSetting the picture size for RGB input signals Setting the signal and black level for DVI signalSpecial characters in the Program Timer screen Program Timer settingsTo reset the program To reset the dataEnabling/disabling the front panel controls Setting the power on modeEnabling/disabling remote control wireless transmission Loop Out settingVideo Wall setting ID number settingOn Delay settings DISP. Mode settingsAuto ID settings Image Adjust settingsPLE Link PLE Link settingsRepeat Timer settings Repeat TimerDisplaying still images in the sub screen Option4 Settings MenuErasing the sub screen image when there is No input signalSetting the menu mode Advanced OSM Settings MenuLanguage Settings Menu Switching the input source quicklyVideo signal formats Color System Settings MenuSetting the video signal format Example Setting the color system to 3.58 NtscPin Assignments External ControlSymptom Checks Remedy Troubleshooting